Prev Next

2022-03-31

All About the Functions of Piston Rings

The piston rings a split ring connected to the outside diameter of a piston within the internal combustion or steam engines. They are typically produced and classified according to functionality and usefulness. The primary purpose of the piston rings is to seal the chamber that can include a combustion chamber for an engine with two strokes or a four-stroke engine. Marine engines come with three or more kinds of rings positioned around the circumference of the piston.

It is a crucial piston component, and the number of rings and their functions depend on the model and size of the engine. In larger 2-stroke engines, compression piston rings to close the combustion chamber. Wiper rings are positioned beneath them to remove lines of the liner and disperse oil on the liner's surface.

The Function of Piston Rings

Piston Rings have four primary purposes:

Compression Gas Sealing

Piston Rings offer a reliable gas seal without scratching. The right amount of radial wall pressure/maintenance Gas compression between the pistons and wall of the cylinder. Piston rings, same as other engine parts, are able to seal the cylinder in that the combustion gas released during ignition does not escape into the cylinder's opening. If the gas that ignites is leaking into the cylinder, will the engine be able to generate sufficient power, thus increasing the consumption of fuel? It's not a good economic decision and also socially.

Lubricating Oil Film Control

Piston rings typically create the lubricating film required to prevent scratching. They function as a scraper and oil control to stop the excessive use of oil when lubricant allows escaping to the combustion chamber.

Heat transfer function

The piston rings transport the heat of the hot piston to the cool cylinder wall/block the engine. The heat energy is transferred through the groove in the piston to the compressor ring and later into the cylinder wall before being transferred to the coolant of the engine. This heat transfer function is vital to maintain stable temperatures and stability in the piston and the rings so that the ability to seal is not compromised.

What If The Piston Ring Breaks?

Damaged rings will exhibit degraded material, increased space between the piston and cylinder wall, and noticeable radial and axial wear. If you do that, you might get a "piston slap." The noise created by excessive piston shaking is known as piston slap. It is caused by too much space between the piston and the cylinder.

Can Piston Rings Be Damaged by Water?

Fires are starting because the fuel is getting too hot. Fuel flooding causes piston rings to be destroyed regularly. Piston rings wear out fast because of gasoline flooding, which damages the cylinder wall's oil coating and causes it to rub against the metal of the piston.

Conclusion

The primary functions of compression rings are to protect the combustion chamber from the crankcase and transfer energy from the engine to the piston. But they are also a key element in regulating engine oil consumption. What is the reason that causes the failure of piston rings? The reason for failure could be that the ring was not compressed enough and then damaged during the installation. Rings that were not installed correctly create combustion paths into the crankcase, resulting in the crankcase being slammed with high pressure, causing a "blow through" and the loss of power.

 

Taiwan ser piston ring manufacturer
Engine parts
Compressor ring

Prev Next