No.290, Sec. 6, Fongyuan Blvd., Fongyuan Dist., Taichung City 42072, Taiwan
◆ Table uses proximity switch for stepless, side to side speed changes and increased convenience.
◆ Table can switch to manual grinding. For safety, manual grinding and hydraulic control cannot be simultaneously operated.
◆ Longitudinal/cross slide ways employ full support design, are precision hand scraped to offer high accuracy and stability on both axes.
◆ Before any machine leaves the factory, it is checked for perpendicularity using a cylindrical angle square.
◆ Imported motor on Z axis (cross) drive ensures accuracy. (on 2A, 3A, AD only)
◆ Full length of slide ways protected from lubricant.
◆ Worktable longitudinal and cross feed parallelism. Gauge is fixed in spindle and placed in light contact with worktable. Standard cross feed results below 0.002mm.
◆ The new hydraulic box with cooling fan, effectively reduce the impact generated by the temperature rise.
|Distance from table surface to spindle center||415mm(PSG)/490mm(APSG)|
|Cross Feed Movement|
|Handfeed per rev.||5mm|
|Handfeed per gra.||0.02mm|
|Intermittent cross feed||0.15-7.5mm|
|Handfeed per rev||1mm|
|Handfeed per gra||0.005mm|
|Feed by MPG (opt) per gra.||(x1)0.001mm (x10)0.01mm (x100)0.1mm|
(dia.x width x bore)
|>Spindle speed(50/60 HZ)||3000/3600rpm|
|Cross feed motor||40W|
|Length x width x height||1750x1300x2100mm|