AGMACHINE TECHNO CO., LTD.
Products
VERTICAL MACHINING CENTER
BOX WAYS
VMC-95/115/116
High-Rigidity Structure
|
Hinged-Belt Chip Conveyor(Option) This allows for rapid and efficient chip removal during machining in order to maintain a clean machine. |
Oil Circulating Cooling System for Spindle A high efficiency spindle cooling system dissipates running induced heat generation in order to maintain spindle accuracy and prolong spindle life. |
Coolant Thru Spindle (C.T.S.)(Option) THE C.T.S. (COOLANT THROUGH SPINDLE) (A TYPE) system provides 20 bar (280 PSI) of hi-pressure coolant delivery that effectively reduces tool wear because of heat and the slow evacuation of metal chips. |
Calibration with laser interferometer is Performed and Certified by PMC All of our machines are calibrated according to the "VDI 3441 3δ" standard. Calibration is performed for the full travel length of each axis. Each measurement is taken six times to ensure the most consistent and accurate readings. |
Enhanced Base Design The base of the VMC-95/116 has 4-hardened ways that allow for greater stability and accuracy even with heavy loading. In essence, the design fully supports the saddle and table along the entire travel lengths of the X and Y-axes. |
24 Tools Magazine A rapid arm-type tool changer is driven with a precision cam, maintaining toolchanging accuracy of 0.01mm, which in turn will help maintain long-term spindle-clamping accuracy. |
Automatic Lubrication System All AGMA machines use a pressurized central lubricating system. The PLC controlled system allows all three axes to be lubricated evenly to maintain accuracy and prolong machine life. |
Double Stoppers Design To prevent any deviation between the servomotor housing and ball screw bearing housing, each axis is equipped with two stoppers to guarantee absolute axial alignment. |
Volumetric Oil Distributor Lubricating oil is evenly distributed to all the sliding surfaces of the machine via volumetric oil distributors. All stationary lines are made of rigid alloy pipe and hard-plumbed for low maintenance operation over the life of the machine. |
Forceful Cleaning Spray-Gun Equipped on the right front side of base this unit along with the assistance of a high-pressure coolant and air mixture helps increase table cleaning speed. |
Specification