886-4-23811347
886-4-23816095
No. 9-1, Wen Shan Nan Lane, Nan Gwen Rd., Nan Gwan Dist., Taichung, Taiwan
www.dengyeu.comProducts
Product Information
•All casting is finished through annealing stress with M casting iron; the slides for X, Y, Z, axle are handled by heating and grinding; the sliding for X, Y, axle is light and clever without abrasion because of pasting anti-abrasion pieces. We use C5 level for X, Y, axle, pre-pressed nut of precise bead-rolling rod, which is to press smoothly and position well due to small gap. Using the timing oil-filling on X, Y, Z axle and nut to ensure the precision for each section.
•A fixed working table, a contact plane between the width of the saddle and the working table is so long that allows a high stability of processing.
•A wider table plane is able to emphasize a rigidity and tenacity.
•Using server auto-feeding on X.Y axle for over 2500 series and reducing working hours by rapid up and down motions. In order to reach a rapid up and down motion, Z axle is a function of reducing speed.
•Using a cannon head with strong structure of vertical milling head. The inside grinding gear is to fill oil by enforcement, 20-stage transmission. (it’s optional to select frequency non-stage transmission.) To shorten the working time and upgrade the enterprise competition because the core of the axle is able to have a boring automatically.
|
MODEL |
2500VH |
|
TABLE |
|
|
Working surface of table |
1500x352mm |
|
Longitudinal travel |
1050mm |
|
Cross travel |
350mm |
|
Vertical travel |
390mm |
|
T-slots (size x number x distance) |
18mx3x70mm |
|
Range of longitudinal feeds (mm/min) |
0-1200mm/min |
|
Rapid longitudinal traverse (mm/min) |
2300mm/min |
|
Rapid vertical traverse |
500mm/min |
|
HORIZONTAL SPINDLE |
|
|
Range of spindle speeds (6set teps) |
60Hz: 86-915 R.P.M 50Hz: 72-763 R.P.M |
|
Taper of spindle nose |
NST40 |
|
Distance of spindle center to table |
100mm-490mm |
|
Distance from spindle center to overarm |
124mm |
|
VERTICAL SPINDLE |
|
|
Range of spindle speeds (20set teps) |
60Hz: 50Hz: |
|
Spindle travel |
140mm |
|
Taper of spindle nose |
NST40 |
|
Swivelling angle of vertical milling head (R&L) each side |
90° |
|
Distance of spindle end to table top |
Max 550 / Min 160 |
|
Swivelling overarm |
|
|
Traverse of over arm |
450mm |
|
Feed of spindle (3 steps) |
0.035 / 0.07 / 0.14 mm(PER REV.) |
|
Distance of spindle center to column surface |
110mm-700mm |
|
MOTORS |
|
|
Vertical spindle |
5HP2/4P |
|
Horizontal spindle |
7.5HP4P |
|
Table longitudinal feed |
DC (Server Motor) |
|
Column up-down |
1HP (Redicing Motor) |
|
Coolant pump |
1/8HP |
|
Net weight |
2200-2500Kg |
|
Packing Measurement (Seaworthy wooden case) |
1690x1790x1810mm |
|
※ There will be some changes for the specification and the design from time to time without any prior notice. |
|
|
STANDARD ACCESSORIES:
OPTIONAL ACCESSORIES:
|
|
