3YRS
RICH SOU TECHNOLOGY CO., LTD.
Products
Abrasives
Plastic Media
Main purpose:
Rubber mold. Clean plastic mold. Automobile parts, such as recycling
Recycling parts to the coating layer. Electronic parts such as lead frame to remove the thermal hardening resin flash
Non-ferrous metals and soft metal parts, such as the removal of Burr
Specification
model | MC | MB | AC | PA | PC | CG |
TYPE | III | II | V | |||
Mohs hardness | 4.0 | 3.5 | 3.2~3.5 | <3 | <3 | <3 |
BARCOL hardness |
64~74 | 54~62 | 46~54 | HRM100~105 | HRM70~74 | HRM70~74 |
shape | Granular | Granular | Granular | Cubic cylindrical shape | Cylindrical | Cylindrical |
proportion | 1.5 | 1.5 | 1.15 | 1.13 | 1.2 | 1.2 |
Features | The hardest - the resin particles in the cutting force of the strongest, and its rapid cleaning capacity close to the other sand. | Commonly used - the most widely used, the largest amount of sand resin material, the use of various types of industrial minor cleaning work. | Durable - is a special coating to remove the aluminum plate, glass fiber and composite materials such as the surface coating. | Soft and durable - high impact strength, long service life. | Can be frozen sandblasting - used in the cold than the overflow glue, a high impact strength, long life, room temperature can also be used. | Can be frozen sandblasting - used in the cold than the overflow glue, a high impact strength, long life, room temperature can also be used. |
use | Replace glass beads, used in mold cleaning, hard materials such as engine parts, turbine blades and paint remover. | Jet aircraft, trucks, trailers, trains, box cars, buses and naval vessels in addition to paint the fastest sand material. | Spray aircraft shells, trucks, trailers, trains, box cars, buses and naval vessels. | In addition to bakelite and semiconductor packaging parts of the overflow plastic and fine metal flash, and will not hurt the surface of the workpiece. | In addition to rubber, plastic and plastic overflow of fine metal flash, and will not hurt the surface of the workpiece. | In addition to rubber, plastic and plastic overflow of fine metal flash, and will not hurt the surface of the workpiece. |
|
||||||
Granularity selection | 12/16# (1.70~1.20mm) 16/20# (1.20~0.85mm) 20/30# (0.85~0.60mm) 30/40# (0.60~0.43mm) 40/60# (0.43~0.25mm) 60/100# (0.25~0.15mm) |
20# (0.5mm) 30# (0.75mm) 40# (1.0mm) 60# (1.5mm) 80# (2.0mm) |
20# (0.5mm) 30# (0.75mm) 45# (1.0mm) 60# (1.5mm) 80# (2.0mm) |
20# (0.5mm) 30# (0.75mm) 45# (1.0mm) 60# (1.5mm) 80# (2.0mm) |