16YRS
CHING HSYANG MACHINERY INDUSTRY CO., LTD.
886-49-2510999
886-49-2510123
No.88, Sec. 2, Fencao Rd., Fenyuan Township, Changhua County 502, Taiwan
www.sawingmachines-ch.com

Products

CIRCULAR SAWING MACHINE/MANUAL TYPE/PNEUMATIC TYPE/ SEMI AUT
Specialist in a Wide Array of Circular Sawing Machines & Cutting Machines
C-275 / 1A / 2A / 3A / M

Quick measurement of the size, hand-operated tongs, hand-operated saw feeding and withdrawing; you can control the saw feeding at any time and give the appropriate pressure in accordance with the size of a tube when doing the action of saw feeding; the saw blade can be used for a long time.



Features:



  • C-275

    • 1.Two-way tongs, without bur when sawing, without powder and dust, with high accuracy.

    • 2.Available sawing angles:Left:90°degress to 0° degree;right:90° degrees to 45° degress.

    • 3.The front setting water box design of the cooling system is convenient and easy to clean up.

    • 4.Iron chippings are treated together, convenient and clean.



  • C-275 Available Rane:

    • Available for thinner iron tubes,stainless steel tubes,aluminum tubes,and copper tubes and copper bars.

      Available for the use or the sample developing of door and window proprietors,and available for proprietors of lighter tubes.



  • C-275 Features of Hand-operated Tongs and Saw Feeding:

    • Quick measurement of the size,hand-operated tongs,hand-operated saw feeding and withdrawing;you can control the saw feeding at any time and give the appropriate pressure in accordance with the size of a tube when doing the action of saw feeding;the saw blade can be used for a long time.



  • C-275-1A Features of Automatic Tongs Hand-operated Saw Feeding:

    • Besides the features of C-275,the automatic clamping function is another feature.When finishing measuring a tube's length,you can press down the swith,and the tube will be clamped tight immediately,which is able to avoid the danger of saw feeding without being clamped tightly.



  • C-275-2A Features of Automatic Tongs Automatic Saw Feeding and Withdrawing

    • The model is most appropriate for huge amout.When finishing adjusting the saw blade and a tube's lengh,you can press down the pedal switch,and it will execute the functions of clamping and saw feeding,which will save the production time.



  • C-275-3A Feature of Automatic Tongs,Automatic Saw Feeding and Withdrawing,Feed,and Positioning:

    • Using the PLC controller,control buttons are located together,allowing for simple operation,agile,easy to maintain.

    • Uniquely designed,most suited for floating feed system,accurate and rapid feeding does not damage workpiece surfaces.

    • Equipped with digital display for easy cutting length adjustment,quick and accurate.

    • The tong's pressure is adjustable at will,ensuring that the tubes will not deform and be damaged.

    • Equipped with electronic-type saw blade protection device,the machine will stop automatically after the saw blade is blunt.

    • Equipped with the counting device that can set the amount and the function of machine stopping.

    • The automatic non-material machine stopping device.

    • Iron chippings are treated together,convenient and clean.




Specification

Model C-275 / C-275M C-275-1A C-275-2A C-275-3A
Head Rotating Angle 90° / 45° 90° / 45° 90° / 45° 90°
Sawing Capacity Area: mm-Solid Bar 38 / 30 38 / 30 38 / 30 38
Sawing Capacity Area: mm-Round Tube 85 / 75 85 / 75 85 / 75 85
Sawing Capacity Area: mm-Angle Steel 75 x 75 / 50 x 50 75 x 75 / 50 x 50 75 x 75 / 50 x 50 75 x 75
Sawing Capacity Area: mm-Square Tube 75 x 75 / 75 x 75 75 x 75 / 75 x 75 75 x 75 / 75 x 75 75 x 75
Sawing Capacity Area: mm-Trough Shaped Steel 75 x 75 / 50 x 50 75 x 75 / 50 x 50 75 x 75 / 50 x 50 75 x 75
Sawing Capacity Area: mm-Rectangular Steel 75 x 90 / 75 x 60 75 x 90 / 75 x 60 75 x 90 / 75 x 60 75 x 90
Cutting Motor A: 2HP/1.4HP-2/4P
B: 1.4HP/1HP-4/8P
A: 2HP/1.4HP-2/4P
B: 1.4HP/1HP-4/8P
A: 2HP/1.4HP-2/4P
B: 1.4HP/1HP-4/8P
A: 2HP/1.4HP-2/4P
B: 1.4HP/1HP-4/8P
Cutting Speed A:120/60rpm
B: 60/30rpm
A:120/60rpm
B: 60/30rpm
A:120/60rpm
B: 60/30rpm
A:120/60rpm
B: 60/30rpm
Cooling Pump Power 1/8HP 1/8HP 1/8HP 1/8HP
Required Air Pressure 4-6kgs/cm² 4-6kgs/cm² 4-6kgs/cm² 4-6kgs/cm²
Used Circular Saw Blade 250/300mm 250/300mm 250/300mm 250/300mm
Feeding Length 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (Just for A3 models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (Just for A3 models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (Just for A3 models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (Just for A3 models)
Dimensions(mm) L710 x W610 x H1350 L850 x W610 x H1350 L850 x W610 x H1350 L1000 x W2150 x H1700
Weight 180 kgs 190 kgs 240 kgs 660 kgs
Standard Accessories A High-speed steel saw blade (φ250mm), a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus. A High-speed steel saw blade (φ250mm), a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus. A High-speed steel saw blade (φ250mm), a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus. A High-speed steel saw blade (φ250mm), a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.