16YRS
CHING HSYANG MACHINERY INDUSTRY CO., LTD.
886-49-2510999
886-49-2510123
No.88, Sec. 2, Fencao Rd., Fenyuan Township, Changhua County 502, Taiwan
www.sawingmachines-ch.com

Products

CIRCULAR SAWING MACHINE/MANUAL TYPE/PNEUMATIC TYPE/ SEMI AUT
Specialist in a Wide Array of Circular Sawing Machines & Cutting Machines
C-370, 1A, 2A, 3A

The Sawing Machines & Cutting Machines Available Range:It is an appropriate machine model for thick,middle,and thin hollow tubes,and solid tubes.

This model is driven by three-set gears,with great torque force,suitable for heavy-duty cutting,The largest pipe diameter can 120mm,and the square pipe can achieve 100x100.It is available for the furniture industry,sports equipment,sheet metal factories,and machine factories.




Specifications:



  • Two-way tongs, without bur when sawing, without powder and dust, with high accuracy.

  • Available sawing angles:

    • Left: 90° to 0°

    • Right: 90° to 45°



  • The front setting water box design of the cooling system is convenient and easy to clean up.

  • Iron chippings are treated together, convenient and clean.





Features:



  • C-370

    • Features of Hand-operated Tongs and Saw Feeding

      • Quick measurement of the size, hand-operated tongs, hand-operated saw feeding and withdrawing; you can control the saw feeding at any time and give the appropriate pressure in accordance with the size of a tube when doing the action of saw feeding; the saw blade can be used for a long time.





  • C-370-1A

    • Features of Automatic Tongs Hand-operated Saw Feeding

      • Besides the features of C-370, the automatic clamping function is another feature. When finishing measuring a tube's length, you can press down the switch, and the tube will be clamped tight immediately, which is able to avoid the danger of saw feeding without being clamped tightly.





  • C-370-2A

    • Features of Automatic Tongs Automatic Saw Feeding and Withdrawing

      • The model is most appropriate for huge amount. When finishing adjusting the saw blade and a tube's length, you can press down the pedal switch, and it will execute the functions of clamping and saw feeding, which will save the production time.





  • C-370-3A

    • Features of Automatic Tongs, Automatic Saw Feeding and Withdrawing, Feed, and Positioning

      • Using the PLC controller, control buttons are located together, allowing for simple operation, agile, easy to maintain.

      • Uniquely designed, most suited for floating feed system, accurate and rapid feeding does not damage workpiece surfaces.

      • Equipped with digital display for easy cutting length adjustment, quick and accurate.

      • The tongs' pressure is adjustable at will, ensuring that the tubes will not deform and be damaged.

      • Equipped with electronic-type saw blade protection device, the machine will stop automatically after the saw blade is blunt.

      • Equipped with the counting device that can set the amount and the function of machine stopping.

      • The automatic non-material machine stopping device.

      • Iron chippings are treated together, convenient and clean.







Specification

Model C-370 C-370-1A C-370-2A C-370-3A
Head Rotating Angle 90° / 45° 90° / 45° 90° / 45° 90°
Sawing Capacity Area: mm-Solid Bar 75/70 75/70 75/70 75
Sawing Capacity Area: mm-Round Tube 120/110 120/110 120/110 120
Sawing Capacity Area: mm-Angle Steel 115x115/100x100 115x115/100x100 115x115/100x100 115x115
Sawing Capacity Area: mm-Square Tube 115x115/100x100 115x115/100x100 115x115/100x100 115x115
Sawing Capacity Area: mm-Trough-shaped Steel 115x115/100x100 115x115/100x100 115x115/100x100 115x115
Sawing Capacity Area: mm-Rectangular Steel 125x100 / 125x100 125x100 / 125x100 125x100 / 125x100 125x100
Cutting Motor A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
A:3HP/2HP - 2 / 4P
B:2HP / 1.4HP - 4/8P
Cutting Speed A: 58/29 rpm
B:29/15 rpm
A: 58/29 rpm
B:29/15 rpm
A: 58/29 rpm
B:29/15 rpm
A: 58/29 rpm
B:29/15 rpm
Cooling Pump Power 1/8HP 1/8HP 1/8HP 1/8HP
Required Air Pressure 4 - 6 kgs/cm² 4 - 6 kgs/cm² 4 - 6 kgs/cm² 4 - 6 kgs/cm²
Used Circular Saw Blade HSS BLADE 275/370mm HSS BLADE 275/370mm HSS BLADE 275/370mm HSS BLADE 275/370mm
Feeding Length 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models) 3-700mm (standard) but can be prolonged 2,100mm and also can be feed 3 times (just for 3A models)
Dimensions(mm) L1000 x W650 x H1420 L1000 x W650 x H1420 L1000 x W850 x H1350 L1000 x W2150 x H1700
Weight 260 kgs 270 kgs 350 kgs 720 kgs
Standard Accessories HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.
HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.
HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.
HSS BLADE Dia.300mm
Standard Accessories: A high-speed steel saw blade, a ruler (not applicable for 3A), a bottle of cutting oil, a set of tools, and a set of clamping apparatus.

Mold
Machine
Vehicle
Contact Supplier
Browsing History
Scroll Up
EZB2B.TW uses cookies,IP to collect data and continually improve the website. By continuing to use this website, you must agree to the use of cookies and IP.