886-4-23599798
886-4-23500778
No.17, Jingke Central 2nd Rd., Nantun Dist., Taichung City 40852, Taiwan
www.win-ho.comProducts
CHARACTERISTICS:
1. Power-saving, stable electric current, and fine cutting trace.
2. Being controlled by a rotary switch, gear shifting is simplified.
3. Stepless speed shifting, any speed in the range is available.
4. Cutting depth reaches 8mm(at 1000rpm).
SPECIFICATIONS
V 430 SERIES
| V430 Series | |||||
| Specifications / Model | V1722 | V1730 | V1740 | V1760 | V1790 |
| Swing Over Bed | 430 mm (17") | ||||
| Swing Over Cross Slide | 240 mm (9-1/2") | ||||
| Center Height | 215 mm (8-1/2") | ||||
| Distance Between Centers | 560 mm (22") | 760 mm (30") | 1000 mm (40") | 1500 mm (60") | 2200 mm (90") |
| Swing Over Gap | 650 mm (25-1/2") | ||||
| Width Of Bed | 300 mm (11-4/5") | ||||
| Spindle Nose | ASA D1 - 6 / D1 - 8 ( Opt. ) | ||||
| Spindle Bore | 58 mm (2-1/4") / 80 mm (3") Opt. ) | ||||
| Taper of Spindle Bore | MT 6 / MT 7 Opt. | ||||
| Range of Spindle Speed | 20 ~ 2000 R.P.M. ( stepless ) | ||||
| Inch Threads Range | 4 ~ 56 T.P.I. | ||||
| Metric Threads Range | P 0.5 ~ P 7 | ||||
| Longitudinal Feeds Range | 0.05 ~ 0.82 mm (0.002-0.032") | ||||
| Cross Feeds Range | 0.02 ~ 0.4 mm (0.001-0.0094") | ||||
| Leadscrew Diameter | 35 mm (1-1/3") | ||||
| Leadscrew Pitch | 4 TPI or 6 mm | ||||
| Taper of Tail Center | MT 4 | ||||
| Tail Spindle Travel | 150 mm (5-7/8") | ||||
| Tail Spindle Diameter | 58 mm (2-1/4") | ||||
| Main Drive Motor | 7.5HP (5.625KW) | ||||
| Coolant Pump | 1/8 HP (0.1KW) | ||||
| Compound Rest Travel | 125 mm (4-7/8") | ||||
| Cross Slide Travel | 245 mm (9-2/3") | ||||
| Machine Dimensions (cm) | 165 x 81 x 119 | 189 x 81 x 119 | 215 x 81 x 119 | 265 x 81 x 119 | 342 x 81 x 119 |
| Packing Dimension (cm) | 182 x 95 x 168 | 200 x 95 x 168 | 228 x 95 x 168 | 279 x 95 x 168 | 355 x 95 x 168 |
| Net Weight | 1500 | 1680 | 1760 | 2050 | 2405 |
| Gross Weight | 1600 | 1780 | 1860 | 2200 | 2555 |
STANDARD ACCESSORIES
Tool Box 1 pc
Centers 2 pcs
Safety pin 1 pc
Screw wrench for cutter setting 1 pc
Back plate 1 pc
Coolant system 1 set
4-way tool post 1 set
Auto-feed stopper ring 1 set
Center sleeve 1 pc
Levelling pads 1 set
OPTIONAL ACCESSORIES
3-jaw scroll chuck
4-jaw independent chuck
Face plate
Steady rest
Follow rest
Work light
4-position carriage stop
Micro carriage stop
Live centers
Rear cutter rest
Taper turning attachment
Rear splash guard
Chuck guard
American tool post
Change gears for D.P and module thread
5C lever collet closer
Driving plate
Quick change tool post
Digital readout
Hydraulic copying machine
Chip guard
ID/OD Grinder
