TE-SHIN CAM CO., LTD.
Products
Specification
Specifications
ITEM | UNIT | RDE80R | |||
---|---|---|---|---|---|
Table diameter | mm | 80 | |||
Center height | mm | 80 | |||
Center bore | Front spindle hole | mm | 30H7 | ||
Through hole | mm | 20H7 | |||
T slot width | mm | N/A | |||
Guide block width | mm(h7) | 14h7 | |||
Servo Motor | FANUC | α | αiF2 | □90 | |
β | βiS2 | □90 | |||
Mitsubushi | HF-75S | □90 | |||
Motor interface | Siemens | N/A | N/A | ||
Gear ratio | -- | 1/24 | |||
Table max. | r.p.m. | 100 | |||
Degree mini. | Degree | 0.001 | |||
Accuracy | Second | 25 | |||
Forward & Reverse repet.accuracy | Second | 7 | |||
Allowable cutting torque | 【kgf-m】 | 【5.8】 | |||
N-m | 57 | ||||
Clamp system | Pneumatic/ Hydraulic | N/A | |||
Clamp output at brake | kg-cm² | N/A | |||
Clamp output torque at brake | 【kgf-m】 | N/A | |||
N-m | N/A | ||||
Allowable work weight | (Radial) Straight | kg | 30 | ||
(Tailstock applied) | kg | 60 | |||
(Axial) Flat | kg | 60 | |||
Allowable load (table clamped) |
F | Kgf/N | N/A | ||
FxL | Kgf/N | N/A | |||
FxL | Kgf/N | N/A | |||
Weight | kg | 25 | |||
Allowable inertia force | kg-m² | 0.2 |
Size Drawings
RDE80R