Products
Processing aligner and pressure beam system
●Processing aligner after heat treatment and high precision grinding to ensure aligner surface flatness.
●Processing aligner motion, direct link air-cylinders with linear guiders parallel up and down to ensure working pieces flatness during processing.
●Independent sigle air-cylinder pressure beam spindle diameter extra to 30mm, equipped with self-lubricating bearing to ensure air pressure strength and stability without displacement during small pieces processing. The air-cylinders pressure beam can be moved as desired for angle processing.
Cutter unit feeding system
●Cutter unit slide moves on liner guider ways and transmitted through ball screw for smoothly and straightness.
●Cutter unit dust hood inside straight collection chute while working.
Automatic lubricator
●Automatic lubrication system with timing control, between 0~60 minutes auto lubricate once to prevent liner guiders breakdown.
Mitsubishi servo
●Japan imported 1KW AC servo motor through coupling that directly drives ball screw transmitted with low backlash working and stable movement.
Polish cutter unit
●High speed stability motor spindle with inverter to prevent traditional belt vibration upgrading products quality.
●Angle adjustable cutter unit through chrome processing makes surface resistance to oxidation, reduce wear of mechanism.
●For different angle, cutter unit can be adjusted 0~60 degree with bolt to firm it.
Cutting depth adjuster unit 0.01mm.
●The side of machine with wide space easy to replace cutter bit and cutter uni.
Model | CGS-1000 | CGS-1300 | CGS-1600 | CGS-2000 | |
Capacity | Width of workpiece | 600 mm | |||
Length of workpiece | 1000 mm | 1300 mm | 1600 mm | 2000 mm | |
Thickness of workpiece | 100 mm | ||||
Table sizes | 1000x600mm | 1300x600mm | 1600x600mm | 2000x600mm | |
Spindle | Spindle speed | 0-10000RPM | |||
Spindle diameter | 28mm | ||||
Spindle motor (High speed) |
2HP | ||||
Others | Direct servo drive | Ball screw | |||
Working speed | 0-2.0 M/min | ||||
Working air pressure | 5 kgf /cm² | ||||
Dust hood outlet dia. | Ø4″ | ||||
Table height from floor | 800 mm | ||||
Machine dimensions | 2150,2450,2750,3150x1120x1550 mm | ||||
Net weight | 2200kgs | 2500kgs | 2800kgs | 3200kgs | |
Power source | 50HZ / 60HZ / 380V / 220V | ||||
Remarks | Fully enclose splash guard. |