Products
EDM Wire Cutting Requirement
- Grain size uniform, good electric conductivity
and well heat-ventilation. - Well and stable tensile strength.
- Less power, well sparking.
- Well feeding, easy operated.
Special Feature of YUAN CUT
-
High quality in unify process:
The high quality of wire's metallurgy was processing technology was by upward continuous casting. High purity of material was used ot keep material stable and special elements were added to minimize the micro structure to have a high quantity maintain.
-
Well property of sparking erosion:
The wire was treated by continuous annealed, the grain size more uniform and the tensile strength more stable.
-
Smooth surface:
The wire surface was treated to reduct the wire creak, flaws and powder, it get higher efficiency while cutting.
-
High dimension precision:
The wire diameter was controlled under allowance within accuracy ±0.001 m/m
-
Loading currency:
The wire much straighten enhance the roperated and feeding efficiency is suitable for automatic threading and feeding.
Material
-
Type E:
Brass C2700 ( 65/35 ), most popular material for EDM high speed cutting, Suitable for any brand of EDM machine. The wire tensile strength is 980-1080 N/. Euro EDM machine need coated wire for precision and finer finishing cut, hard wire, 0.25m/m Select: YBZ-25H
-
Type B:
Brass C2720, the wire surface was treaded to less the powder, it make much cutting speed, the speed efficiency is 10-15% higher than C2700, it is much suitable for Euro and Japanese EDM machine. The wire tensile strength is 1000-1100N/
-
Type B:
Coated-wire Brass C2720 with Zn coated is suitable for high speed , precision and finer finishing cut .This speed efficiency is 20% higher than C2720. The wire tensile strength is 1000-1100 N/
-
Type F:
Elements added, much higher tensile, suitable for higher precision cutting and finer finishing, the speed efficiency is 20% more than C2700. The wire tensile strength is 1100-1200 N/.
Wire Strength and Cutting
Hardness | Tensile Strength | Elongation | Cutting Selection | ||
---|---|---|---|---|---|
kg/ | N/ | PSI | % | ||
Hard | >100 | >980 | >14,400 | <2 | Surface straighten cutting |
Medium hard | 60-70 | ≒650 | ≒9,400 | <5 | Tape cutting under 10 degree |
Soft | 45-60 | ≒445 | ≒6,400 | >20 | Tape cutting between 7~30 degree |
Spool-Type, Size, Package and Wire Weight
Type | Wire Weight | Size(m/m) | Package | |||||
---|---|---|---|---|---|---|---|---|
Kg | lbs | a | w | d | D | h | ||
P-3 | 3.0 | 6.6 | 10 | 110 | 82 | 130 | 20 | 4#/Ct. |
P-5 | 5.0 | 11.0 | 12 | 114 | 90 | 160 | 20 | 4#/Ct. |
P-10 | 10.0 | 22.0 | 12 | 134 | 90 | 200 | 30 | 2#/Ct. |
P-15 | 20 | 44.0 | 15 | 140 | 110 | 250 | 34 | 1#/Ct. |
D-125 | 3.5 | 7.7 | 12 | 125 | 82 | 125 | 30 | 4#/Ct. |
D160 | 6.5 | 14.3 | 15 | 160 | 100 | 160 | 22 | 4#/Ct. |
D-200 | 15 | 33.0 | 19 | 200 | 120 | 200 | 22 | 1#/Ct. |
Wire Diameter and Length in Spool
Diameter | Length in Spool(m) | |||||||
---|---|---|---|---|---|---|---|---|
(m/m) | (inch) | P-3 | P-5 | P-10 | P-15 | D-125 | D-160 | D-200 |
0.10 | 0.004 | ----- | ----- | ----- | ----- | ----- | ----- | |
0.15 | 0.006 | ----- | ----- | ----- | ----- | ----- | ----- | |
0.20 | 0.008 | |||||||
0.25 | 0.010 | |||||||
0.30 | 0.012 |