16YRS
SHOU ZUAN PRECISION MACHINERY CO., LTD.
Products
NC Milling machine
NC MILLING MACHINE
SZ-2200H-VSD-NC
NST 40 / BT 40
X800 / Y400 / Z350
FEATURES
Retain the traditional X, Y, Z axis hand wheel feel, combined with modern NC controller, dual operating functions can be flexibly controlled
ShopMill/ShopTurn (machining step programming)
Simultaneous recording (realtime simulation of curr. machining)
2.5D simulation (machined part)
Specification
Control Panel
X, Y axis manual control then automatic feed
Z axis Counter weight balance (500kgs)
SPECIFICATIONS
Model | SZ-2200H-VSD-NC | ||
---|---|---|---|
Spindle | Spindle speed of Vertical | rpm | 60-3600 |
Spindle speed of Horizontal | rpm | 75-1050 | |
Spindle taper | NST 40 / BT 40 | ||
Swivel angle of head | mm | 45° (R&L) | |
Overarm travel | mm | 140 | |
Quill feed per revolution of spindle | mm | 0.035 / 0.07 / 0.14 (a circe) | |
Table | Table size | mm | 1350 x 305 |
T-slots | mm | 16 x 3 x 63 | |
Maximun table load | kgs | 500 | |
Travel | X, Y, Z-axis | mm | 800 x 400 x 350 |
Spindle nose to table surface | mm | 0-530 | |
Spindle center to column slide ways | mm | 150-600 | |
Feed | Slide feedrate X / Y / Z | Box Way | |
Cutting feedrate X / Y / Z | m/min | 2.4 / 2.4 / 2.4 | |
Rapid feedrate X / Y / Z | m/min | 3 / 3 / 3 | |
Motors | Spindle motor of Vertical | kw | 3.7 |
Spindle motor of Horizontal | kw | 3.7 | |
X, Y, Z axis drive motors | kw | 1 / 1 / 2 | |
Lubricating pump | w | 150 | |
Electromagnetic pump | w | 40 | |
Coolant pump | w | 95 | |
Other | Machine measurement (L x W x H) | mm | 2150 x 2030 x 2400 |
Paking measurement (L x W x H) | mm | 2300 x 1760 x 2200 | |
Weight | kgs | 3000 |
* All specification , dimension and design characteristics shown in this catalogue are subject to change without notice.
- STANDARD ACCESSORIES
- Siemens 808D control
- X, Y, Z - axis Ball screw
- Tool box and tools
- Working light
- Draw bar (manual)
- Tapping Equipment of spindle
- X, Y, Z - axis motor automatic feed
- Y axis guideway cover
- Heat Exchanger
- Alarm light
- Support
- Arbor of Horizontal
- Z axis Counter weight balance
- OPTIONAL ACCESSORIES
- Transformer
- Draw bar (pneumatic)
- Coolant system with chip tray
- X Axis Extend to 950mm Travel