Fully automatic in 3 axis (x,y,z)
CAHD CONTROL PANEL

• 

• 

• DESCRIPTION		UNIT	DSG-618CAHD
  General Capacity	Table size (lxw)	mm	150x460
  	Max.grinding length	mm	475
  	Max.grinding width	mm	160
  	Distance from table surface to spindle center	mm	400
  	Standard mag. Chuck size	mm	150x450
  Longitudinal Movement	Manual travel	mm	485
  	Hydraulic traverse	mm	485
  	Hydraulic feed (table speed) approx.	m/min	1~25
  Cross Movement	Manual travel	mm	180
  	Auto cross feed	mm	180
  	Hand feed per revolution	mm	5
  	Hand feed per graduation	mm	0.02
  	Continuous cross feed (approx.)50/60HZ	mm/min	510/650
  	Increment cross feed	mm/min	0.5~10
  Vertical Downfeed	Rapid traverse (approx.)	mm/min	230
  	Slow traverse (approx.)	mm/min	29
  	Hand feed per revolution	mm	1mm
  	Hand feed per graduation	mm	0.005mm
  	Auto downfeed rate	mm	0.001~0.099
  	Jog	mm	0.001
  	Pre-set spark out times		0.9(passes)
  Grinding Wheel	Wheel size (diax width xbore)	mm	Ø180x13x31.75
  	Spindle speed (50/60HZ)	r.p.m	3000/3600
  Motor	Spindle drive motor	HP	2
  	Hydraulic motor	HP	1
  	Cross feed motor	W	25
  	Elevating motor	W	40
  Weight	Net weight / gross weight (approx.)	kg	910/1040
  Packing Size	Length × width × height	mm	1560x1300x2200

  ※ The manufacturer reserves right to modify the design,specification mechanisms etc. without notice.

• STANDARD ACCESSORIES

• Grinding wheel
• Wheel flange with extractor
• Balancing arbor
• Diamond dresser and base
• Working lamp
• Leveling plate
• Leveling screw & nut
• Tool box with tools
• Operation manual & Inspection report
• Touch-up paint