Products
Linear Shaft Motor
Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%
1/1000 High Resolution Signal Process
High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.
Stable Discharge Board (SD-Master)
Irregular Thickness Cutting
The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.
PCD Cutting & Graphite Machining Power supply
The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.
Max. Workpiece SizeL x W x H (mm):990x560x295
Max. Workpiece Weight (Kg):500
X/Y Stroke (mm):560x360
U/V Stroke (mm):100x100
Z Stroke (mm):300
Wire Spool Weight (Kg):10
Footprint (mm)W x D x H:2480x2980x2210
Water System Capacity (L):900
Machine Weight (Kg):3600
(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.
Controller Specifications
Controller System |
WINDOWS CE |
Control Device |
64-bit Industrial PC |
Memory Device |
128 MB CF Card |
Screen Display Device |
17” Color TFT Touch Screen |
Data Input |
Keyboard, RS-232, USB, Ethernet, FTP |
Simultaneous Axes |
4 Axes / 5 Axes (Option on W Axis) |
No. of Control Axes |
5 Axes / 6 Axes (Option on W Axis) |
Min. Command Unit |
0.0001mm |
Max. Command Range |
±9999.9999 mm |
Command Type |
mm / inch |
Cutting Data Memory |
99999 sets |
Ignition Power Supply |
32 Steps,53V~138V |
On time |
24 Steps |
Off time |
43 Stpes |
Discharge Mode |
Rough Cut / Skim Cut / Fine Cut |
Controller Functions
Backlash compensation |
Constant / Servo feed |
Different shape interpolation |
Auto position (edge, center) |
Linear / Circular interpolation |
Auto power recovery |
Background edit |
Soft limit |
Cutting path display |
Trace to break point |
Star point return |
Corner control function |
Retrace to start point |
Reference point return |
Break point return |
Diagnosis |
Reference point setting |
Taper cutting |
Auto corner |
Z axis software limit |
Multi-blocks skip |
Maintenance memo |
Program edit / copy / delete |
Manual data input |
Cutting log |
Axis exchange |
Rotation |
Auto / Manual feed |
Mirror |
Dry run |
Single block |
Short back |
Optional stop |
Block stop |
Sub program |
Wire consumption offset |
Pitch compensation |
Parallel compensation |
2nd. Soft limit |
Anti-Collision |
Standard Accessories
Upper / Lower Flushing Nozzle |
Diamond Guide |
Conductor Plate |
Diamond Guide Remove Jig |
Brass Wire |
Tool Box |
Waste Wire Bin |
Ion Resin Tank |
Ion Exchange Resin |
Paper Filter |
Vertical Alignment Jig |
Water Chiller |
SD Master |
Auto Wire Threading (AWT) |
|
Optional Accessories
Spray mist Lubricator |
Pilot Lamp |
Remote Master |
Safety Door Interlock |
PCD / Graphite Cutting |
0.1mm Wire Application |
Transformer |
45Kg Wire Jumbo Feeder |
Auto Voltage Stabilizer |
X/Y Linear Scale |
6th Axis Package (W axis) |
Alarm Messenger |
MST (AL-400SA/500SA/560SA/600AS) |
High Pressure Water Jet Threading (Not Available with Anti-Collision on Z Axis) |
※ All the specifications are subject to change without prior notice.
棒型線性馬達
高靈敏的伺服反應速度,可使放電間隙控制更加穩定,提升加工速度8~10%
Windows CE控制器
徠通科技100% 自行開發控制器,完全掌握關鍵技術,可提供客戶最迅速之售後服務
遠端監控
透過乙太網路可於電腦端進行多機同步監視,不在機台旁也能掌握即時狀況
線消耗補償 (錐補功能)
控制器內建整體線消耗補償設定功能,簡化由程式碼中逐孔設定的繁複程序
SD-Master穩定放電模組
高重現精度:相同加工參數在不同機台上可得到精度一致性,有效提昇模具生產品質與簡化管理程序
高感度撞機保護裝置
運用伺服反應的高敏感度,做為防撞的保護機制,當機頭撞上工件時,控制器立即偵測到異常的訊號,可以有效的避免機器撞機產生的損害
MST 鏡面電源
徠通公司獨特領先 業界最先進的放電技術,40mm厚度的工件上,表面粗度能達到Ra 0.08
廢線排除裝置
自動穿線系統之廢線排除裝置,不受限於廢線長度,能有效且迅速將廢線移除,大幅提昇機台自動化之機能
第六軸加工
可使用水平模式或垂直模式進行加工
變厚度加工
徠通智慧型高速放電電源,面對工件厚度以及沖水條件的變化,仍然能夠以穩定的高速度切削並且不斷線
棒型線性馬達
高靈敏的伺服反應速度,可使放電間隙控制更加穩定,提升加工速度8~10%
Windows CE控制器
徠通科技100% 自行開發控制器,完全掌握關鍵技術,可提供客戶最迅速之售後服務
遠端監控
透過乙太網路可於電腦端進行多機同步監視,不在機台旁也能掌握即時狀況
線消耗補償 (錐補功能)
控制器內建整體線消耗補償設定功能,簡化由程式碼中逐孔設定的繁複程序
SD-Master穩定放電模組
高重現精度:相同加工參數在不同機台上可得到精度一致性,有效提昇模具生產品質與簡化管理程序
高感度撞機保護裝置
運用伺服反應的高敏感度,做為防撞的保護機制,當機頭撞上工件時,控制器立即偵測到異常的訊號,可以有效的避免機器撞機產生的損害
MST 鏡面電源
徠通公司獨特領先 業界最先進的放電技術,40mm厚度的工件上,表面粗度能達到Ra 0.08
廢線排除裝置
自動穿線系統之廢線排除裝置,不受限於廢線長度,能有效且迅速將廢線移除,大幅提昇機台自動化之機能
第六軸加工
可使用水平模式或垂直模式進行加工
變厚度加工
徠通智慧型高速放電電源,面對工件厚度以及沖水條件的變化,仍然能夠以穩定的高速度切削並且不斷線