886-4-22712000
886-4-22712009
No. 43, Industrial 17th Rd., Taiping Dist., Taichung City 41154, Taiwan
www.visionwide-tech.comProducts
NF series machines, with typical VW products features of rigid structure and high precision, are designed with 5-face function of multi-angle cutting and X-Y roller ways structure. It speeds up 3 axes rapid traverse and increases the machine's efficiency of utilization.
Solid beam with big cross section and roller ways design strengthens the stiffness of Y-travel.
Wide base with 3 roller sliding ways improve the load capacity and dynamic accuracy.
Box structure of headstock with 6 guiding roller blocks, and 1- 1.4 meter Z-travel keeps stiffness and minimizes the interference between spindle and work piece, carrying the complete function of 5-face cutting. High efficient power transmission is made by well arranged spindle motor position and short shaft device.
| MODEL | UNIT | NF- 2223 | NF- 3223/ 30 | NF- 4223/ 30 | NF- 5223/ 30 | NF- 6223/ 30 | NF- 8223/ 30 | NF- 10223/ 30 | NF- 3226/ 33 | NF- 4226/ 33 | NF- 5226/ 33 | NF- 6226/ 33 | NF- 8226/ 33 | NF- 10226/ 3 | |||
| TRAVEL | |||||||||||||||||
| X axis | mm | 2,200 | 3,200 | 4,200 | 5,200 | 6,200 | 8,200 | 10,200 | 3,200 | 4,200 | 5,200 | 6,200 | 8,200 | 10,200 | |||
| Y axis | mm | 2,300/3,000 | 2,600/3,300 | ||||||||||||||
| Z axis | Box way | mm | 920/1,020(Opt.) | 920 /1,020(Opt.) | |||||||||||||
| Linear way | mm | 1,000(Opt.)/1,200(Opt.)/1,400(Opt.) | 1,000(Opt.)/1,200(Opt.)/1,400(Opt.) | ||||||||||||||
| TABLE | |||||||||||||||||
| Table dimension | mm | 2,000 × 2,050 | 3,000 × 2,050 | 4,000 × 2,050 | 5,000 × 2,050 | 6,000 × 2,050 | 8,000 × 2,050 | 10,000 × 2,050 | 3,000 × 2,450 | 4,000 × 2,450 | 5,000 × 2,450 | 6,000 × 2,450 | 8,000 × 2,450 | 10,000 × 2,450 | |||
| Max. table load | kg | 9,000 | 13,000 | 16,000 | 20,000 | 22,000 | 24,000 | 26,000 | 13,000 | 16,000 | 20,000 | 22,000 | 24,000 | 26,000 | |||
| SPINDLE | |||||||||||||||||
| Spindle motor (continuous/ 30 minutes rated) | kW | 18.5/22(22/26Opt.)(30/37Opt.) | 18.5/22(22/26Opt.)(30/37Opt.) | ||||||||||||||
| Spindle speed | Box way | 2- step gear | rpm | 4,000/6,000(Opt.) | 4,000/6,000(Opt.) | ||||||||||||
| Belt- driven | rpm | 8,000/10,000(Opt.) | 8,000/10,000(Opt.) | ||||||||||||||
| Linear way | 2- step gear | rpm | 22/26kW: 4,000/6,000(Opt.) ; 30/37kW: 3000(Opt.)/5500(Opt.) | 22/26kW: 4,000/6,000(Opt.) ; 30/37kW: 3000(Opt.)/5500(Opt.) | |||||||||||||
| Belt-driven | rpm | 10,000(Opt.) | 10,000(Opt.) | ||||||||||||||
| FEED | |||||||||||||||||
| Cutting feed rate | mm/ min | 1-7,000 | 1-7,000 | ||||||||||||||
| Rapid traverse | m/ min | X:24 | X:24 | X:18 | X:12.5 | X:10 | X:8 | X:8 | X:24 | X:18 | X:12.5 | X:10 | X:8 | X:8 | |||
| Y:20 | Y:20/15 | Y:20/15 | Y:20/15 | Y:20/15 | Y:20/15 | Y:20 | Y:20/15 | Y:20/15 | Y:20/15 | Y:20 | Y:20/15 | Y:20/15 | |||||
| Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | Z:15 | |||||
| ACT | |||||||||||||||||
| Tool storage capacity | Vertical type tool change | pcs | 40/60(Opt.) | 40/60(Opt.) | |||||||||||||
| Floor-standing type vertical tool chang | 40(Opt.)/60(Opt.) | 40(Opt.)/60(Opt.) | |||||||||||||||
| Floor-standing type vertical-horizontal tool change | 32 (Opt.) / 40 (Opt.) / 60 (Opt.) | 32 (Opt.) / 40 (Opt.) / 60 (Opt.) | |||||||||||||||
| OTHERS | |||||||||||||||||
| Machine net weight | kg | 29,000 | 33,400/ 34,900 | 38,400/ 40,400 | 43,400/ 45,400 | 48,000/ 50,400 | 56,000/ 60,400 | 64,000/ 70,400 | 36,400/ 38,400 | 41,400/ 43,900 | 46,400/ 48,900 | 51,000/ 53,900 | 60,000/ 63,900 | 69,000/ 73,900 | |||
| Machine gross weight | kg | 32,000 | 37,100/ 38,600 | 43,400/ 45,400 | 48,400/ 50,400 | 53,000/ 55,400 | 62,000/ 66,400 | 70,000/ 76,400 | 40,100/ 42,100 | 46,400/ 48,900 | 51,400/ 53,900 | 56,000/ 58,900 | 66,000/ 69,900 | 75,000/ 79,900 | |||
