Products
MRS series are especially for food, pharmaceutical, chemical and semiconductors machine
The setscrews of locknut intersect a 0° angle with axis which drive the locking brass perfectly stuck on the thread of shaft.
‧No thrust washer or keyway needed.
‧Easy to assemble and disassemble.
‧Can be re-used if handled properly.
‧The connecting face and thread area are all produced by high precision turning process.
‧Material:JIS SUS304 Fully,
stainless steel (stainless pin
and setscrew included
‧Precision:ISO 4H
‧Thread Run-out with Axial:
0.005 mm
NIKKI Precision Locknuts have been selling to Europe, States, Japan for more than 20 years, our quality is very well and precise.
We not only provide regular type of locknuts as below, we also provide customer services if you need.
If you have and questions or need any information, please kindly contact us :
email:export@nikki.com.tw or tel: +886-4-23502590
NIKKI Product Spec:
TYPE & Pitch | Dimensions in mm | Set Screw Data | ||||||||
d0_ISO 5H | D | h | d | d1 | n | g | t | 2-M | Max. Torque_Nm | |
MRS0.6X0.5P | M6X0.5 | 16 | 8 | 11 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS08X0.75P | M8X0.75 | 16 | 8 | 11 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS08X1.0P | M8X1 | 16 | 8 | 11 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS0X0.75P | M10X0.75 | 18 | 8 | 13 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS10X1.0P | M10X1 | 18 | 8 | 13 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS12X1.0P | M12X1 | 20 | 8 | 18 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS15X1.0P | M15X1 | 25 | 8 | 21 | - | 3 | 3 | 2 | M4 | 2.2 |
MRS17X1.0P | M17X1 | 28 | 10 | 23 | - | 3 | 4 | 2 | M5 | 4.8 |
MRS20X1.5P | M20X1.5 | 32 | 10 | 27 | - | 3 | 4 | 2 | M5 | 4.8 |
MRS25X1.5P | M25X1.5 | 38 | 12 | 33 | 26 | 3 | 5 | 2 | M6 | 8 |
MRS30X1.5P | M30X1.5 | 45 | 12 | 40 | 31 | 3 | 5 | 2 | M6 | 8 |
MRS35X1.5P | M35X1.5 | 52 | 12 | 47 | 36 | 3 | 5 | 2 | M6 | 8 |
MRS40X1.5P | M40X1.5 | 58 | 14 | 52 | 41 | 3 | 6 | 2.5 | M6 | 8 |
MRS45X1.5P | M45X1.5 | 65 | 14 | 59 | 46 | 3 | 6 | 2.5 | M6 | 8 |
MRS50X1.5P | M50X1.5 | 70 | 14 | 64 | 51 | 3 | 6 | 2.5 | M6 | 8 |