Description

Features
Full isolation manual bypass
When regulators for maintenance or repairs required under state bypass can be installed manually switch to bypass direct municipal power supply, and there are still short-circuit and overload protection.
Output voltage undervoltage, high-voltage detection protection
Regulators with a separate internal undervoltage detection output voltage, output voltage, high-voltage circuits, equipment load characteristics can be set upper and lower limits. When the output voltage undervoltage, high pressure, the regulator will be automatically cut off power output load protection, and early warning display.
Less output voltage detection of line protection
Detect less of a line function, when importing or exporting less of a power line, the system will automatically cut off the power supply output load protection, and early warning display.
Main structure with over-temperature detection coil
With the temperature structure of the coil, when the coils are produced by the abnormal Overheating or aging, can be rapidly detected to facilitate the rapid drop in maintenance or replacement of the coil, and a warning display.
Complete machine modular assembly design
Complete machine divided into panels that control circuit, electronic control system and the structure of the coil in four parts, each regulator were modular assembly, any part of the replacement are not doing debugging.
Prevent launch high-pressure device
When Regulators boot or power outages, reuse, all of this equipment will be launched from the low-voltage, under any circumstances through this equipment will be high-voltage power output variance occurred due to the output voltage to avoid excessive damage to load equipment.
Humanized anti-circuit maloperation
To prevent the misuse of human negligence and touch switches, the output power activated or improper power, the AID bond model is specifically designed to control, we must also press the button only two power output, or press the button, it closed two output Power.
Dual insurance penthouse Control System
The regulator and the regulator circuit detection circuit, in addition to the original interlocking device, plus a monitor protection circuit, the output voltage can be fully and to ensure that the protection of the normal functions of action.
Automatic load short-circuit protection
Load any of the fault, the machine not be affected by the damage can be avoided by the general regulator of the short-circuit caused the fire danger or damage regulator itself.
Current imbalances will not have a pressure drop
The regulator coil around to the dual-stack design, so when the load current with 50% in a phase imbalance or overload when it is not cause of the line voltage of the pressure drop, so ideal for motor, servo motor and Current launch frequent equipment.

Structural characteristics
Ultra-foot capacity, overloading ability
The non-contact voltage regulator can be 100% load continuous use, and can withstand inductive load transient. That will not damage the equipment and reduced life.
Better efficiency, excellent characteristics
The use of high magnetic beam, low iron loss Silicon steel slitting loss to no-load, no-load current to a minimum, all contained in the use of the most efficient, high-performance play a regulator to reduce power losses.
Continuous adjustment of voltage
Make use of voltage adjustment induction principle, no contact in a linear movements in the load pressure adjustment voltage adjustment will not generate noise coupling and pressure drop, to load input power quality and the same.
Sturdiness and durability, and long service life
Induction for the main internal voltage regulators, voltage regulators, without any contact components and component wear, and its main structure for the pallet, Shell, coil, formed by Silicon steel slitting, surges, the impact can be nonlinear load bear, strong, durable, as the main feature of life of up to 10 years.
Broad scope of the AC power input
System design can withstand a wide voltage input range, in a poor environment AC input power can still work, all the components have been selected, high voltage transient resistance and the current.
Easy maintenance and maintenance
Internal modular design, all components are standardized criteria, and the main part of the coil structure, as long as it maintains normal external clean, without any maintenance and maintenance.
Tolerate harsh environment
Using high efficiency and the safety of large parts of the combination of industrial-grade, can tolerate poor temperature, humidity, vibration and pollution filthy environment.
Small size, light weight
The introduction of the new patent process technology and high-strength structural design of a new patent with precision machining, to make the products of smaller size, less weight, and achieve maximum capacity.

　Contact Supplier

Add to Favorites