Products
● Main Structure of Machines
● Hydrostatic Bearings
● Semi-Hydraulic Float Bearings
● Regulating Wheel Drive
● Spindle Oil Circulation
● Slide Device
● Wheel Dressing Device
● Grinding Accuracy
Machine with grinding, regulating wheel symmetry axis direction of feeding, to collocate JAINNHER’s design of large loading unloading device after grinding, regulating wheel wearing. It substantially increases in production efficiency. Wheel spindle runs on hydrostatic bearing, can be carried heavy load and cut. It effectively reduces the wear and keep the spindle running in center of structure. High-precision and extended machines life of the advantages.
This machine can be used with CNC control, the program control feeding and dressing to achieve automation functions. Improve work efficiency and product stability. Grinding , regulating wheels feeding axis use box way linear motion system, C1 class ball screw, angular contact ball bearing and pretension nut to achieve high precision machine.
1. Main Structure of Machines
They are cast of high grade FC-30 iron, melted by advanced induction furnace, then cast in resin cores. In order to ensure stability and rigidity, they are heat-treated with normalizing procedure prior to machining.
2. spindle
(1) Hydrostatic bearing
Precision ground hydrostatic bearing: Substantial decrease in heat deformation associated with hydrodynamic bearing. Minimal friction, lateral displacement, and pressure.Extended tool life under heavy cut loads. The grinding wheel spindle runs on hydrostatic bearing with high pressure oil film for added precision under heavy loads. Substantially reduces wear while prolonging spindle trueness. SNCM-210H carbon steel hardened beyond HRC60, Yielding high torsion resistance.
(2) Hydrodynamic bearing
They are made of SNCM-220H Ni-Cr-Mo alloy steel and case-hardened, carbonize, then computerized sub-zero degree treated, to surface hardness over HRC62 at 1.0mm depth. Core hardness is kept at about HRC25-30 to ensure consistency of high precision grinding operation. Spindle withstand high torsion and have a long and lasting life. They are made of KJ-4 alloy bushing metal with a three point hydraulic cycle system. The semi-hydraulic float spindle is protected by an oil membrane which results in minimal contact friction. This device is specially designed for high speed and heavy load operation.
3. Regulating wheel drive
A Japanese servo motor provides control of speeds from 10 to 250 RPM., and is used for the regulating wheel which can be adjusted to ideal linear speeds. When the diameter of the regulating wheel changes the same linear speed can still be maintained so as grind the best quality products. The motor is driven by a timing-belt to reduce vibration and noise. Since the motor housing and spindle housing are joined together as an integrated body, when the regulating wheel tilts the motor also follows. This completely overcomes problems caused by unparallelism and torsion of belt pulleys and the belts.
4. Spindle oil circulation
(1) Hydrodynamic
There is a variable vane type oil pump for the hydraulic dressing and enforced spindle oil circulation. The oil tank is located outside of the machine for easy maintenance. Two layers of filter plus a pressure regulator ensure the cleanliness of spindle oil and the consistency of oil film thickness, thus extending the service life of the wheel spindle and the steadiness of accuracy.
(2) Hydrostatic
Hydraulic pump for grinding wheel head and spindle motor driver with sensing function.When press wheel start button, before oil reach alloy bearing will through pressure detect switch, if pressure is not enough, it cannot push the switch, the spindle will not start. Therefore, when pressure is not enough or oil pipe blocked, pressure switch will stop the wheel spindle automatically. It will protect the wheel spindle and alloy bearing. (Hydraulic pump motor 12model is 2HP, 18, 20 and 24 models are 3HP).
5. Regulator
Grinding wheel spindle with high pressure hydrostatic device, apply a regulator on reentrance for adjusting high pressure oil to support radial center. The setting work pressure is 20 kg/cm2
6. Slide Device
The lower slide consists of two internally mounted V-shaped slides and cuneiform protector to ensure smooth movement, stable operation and prevent the entering of debris or liquid from the working environment. The swivel slides on a dovetail flute and swivels ±5 degrees. There is a fine tuning hand wheel for precise adjustment. The accuracy per calibration is 0.001mm in diameter for high precision and easy operation.
7. Wheel Dressing Device
The device is made of FC-30 cast iron and normalized then precisely ground. It is driven by a hydraulic system with a step-less speed regulator for easy and steady dressing. There is a safety handle for emergency purposes. In order to upgrade the straightness and the surface finish on through-feed grinding of long work pieces, please adjust the angle of the dressing device (swivels ±5 degrees). The regulating wheel should be adjusted to resemble a concave barrel to increase contact length while grinding.
8. Grinding Accuracy
Item | Accuracy/ Type/ Capability |
Workpiece | Ø2 x 20 L |
Metal | SUJ-2 |
Hardness | HRC-62 |
Grinding wheel | WA 1000# |
Machine | JHC-18 |
CUT OFF | 0.25 mm |
TRAVERSING LENGTH | 1.0 mm |
MAG | 10000 |
Ra | 0.02μm |
RMAx | 0.28μm |
Rz | 0.24μm |
RMS | 0.02μm |
Rt | 0.22μm |
Rtm | 0.20μm |
Quality of Our Machines
The performance of all our machines is strictly inspected for roundness, straightness and surface roughness on standard work pieces before delivery.
9. Operation Applications
CNC Coordinate
Measuring Machine
JHC-2408T-NC3 | JHC-2408T-CNC6 | |
Standard work rest (dia.) | Ø2 ~ Ø230 mm | |
---|---|---|
Grinding wheel size (dia. x width x hole) | Ø610 x 205 x Ø304.8 | |
Regulating wheel size (dia. x width x hole) | Ø305 x 205 x Ø127 | |
Grinding wheel speed | 1050 R.P.M | |
Regulating wheel speed | 10 - 250 R.P.M variable speed | |
Grinding wheel motor | 40 HP | |
Regulating wheel motor | 5.5 kw Servo motor | |
Spindle circulating pump motor | 1 HP+3 HP | |
Coolant pump motor | 1/2 HP | |
Grinding wheel feed | 3.5 kw Servo Motor | 2.5 kw Servo Motor |
Grinding wheel dressing attachment | 0.4 kw Servo Motor | 0.5 kw Servo Motor |
Regulating wheel feed | 2.5 mm (Rev) / 0.001 mm (Gra) | 2.5 kw Servo Motor |
Regulating micro feed on handwheel | 0.02 mm (Rev) / 0.001 mm (Gra) | ---- |
Regulating wheel dressing attachment | 2 mm (Rev) / 0.01 mm (Gra) | 0.5 kw Servo Motor |
Grinding wheel dressing cross side | 0.75 kw Servo Motor | 0.75 kw Servo Motor |
Regulating wheel dressing cross side | Hydraulic | 0.75 kw Servo Motor |
Regulating wheel tilt angle | +3° ~ -5° | |
Regulating wheel swivel angle | ±1° | |
Floor space (L x W x H) | 3100 x 2400 x 1950 mm | |
Net weight / Gross weight | 7000 kgs / 7500 kgs | |
Size of case (L x W x H) | 3300 x 2200 x 2150 mm (amchine), 2600 x 1400 x 1300 (accessory) | |
* Manufacturer reserves the right to change specification without prior notice. |