886-4-25249998
886-4-25247698
No.96, Ln. 191, Daming Rd., Shengang Dist., Taichung City 429, Taiwan
www.grinder-grima.comProducts
Twin grinding wheel spindles + Steady Rest
Max. machining depth is
410 mm
Fully enclosed splash guard
FANUC Controller
X-axis / Y-axis stroke is
650 mm / 550 mm
Linear and Boxway are just perfect match
» X-axis-
With a large span design and high rigidity Linear Roller Guides.
Three linear slide rails with nine linear slides that make axial more high-rigid and increase stability.
» Z-axis-
Equipped –V- Boxway design, ensure the grinding straightness
With incessant lubrication system can lower friction coefficient and become more smooth while axial moving.
Spindle
High rigidity of cartridge-type A2-6 spindle
Air-flow slide rail
It could be set to any position flexibly depends on the any length of workpiece
Its angles can be set in -5° to +15°
Steady Rest
It could be used with workpiece when needed, and would be more precise while grinding
Belt Drive Spindle
Grinding outer Dia. Ø90
You can switch differ-RPM spindles to require any workpiece
Powered by Brushless Servomotor
Increasing torque values and efficiency while in low rpm grinding with spindle
Built - in Motor Spindle
Grinding outer Dia. Ø160 with 7.5 kW output power
Wheel Max. outer Dia. up to Ø205 enables more easily while grinding
|
Type |
KG-410SR |
|
|---|---|---|
|
Working Capacity |
Grinding dia. range |
ø4～ø320 mm |
|
Max. grinding depth |
410 mm |
|
|
Max. swing range of workpiece |
ø390 mm |
|
|
Swing range within the water proof cover |
- |
|
|
Controller System |
Controller |
FANUC |
|
Working Head |
Spindle speed |
0～1000 rpm |
|
X-axis feedrate/stroke |
10 M/min / 650 |
|
|
X-axis minimum command unit |
0.0001 mm |
|
|
Working head swiveling angle |
-5°～+15° |
|
|
Working Table |
Y-axis & Z-axis feedrate |
Z：6M/min |
|
Y-axis & Z-axis max. stroke |
Z：550mm |
|
|
Y-axis & Z-axis minimum command unit |
Z : 0.0001mm |
|
|
Distance from spindle center to the ground |
1050 mm |
|
|
Hydraulic System |
Oil Tank Capacity |
30 L |
|
Cooling System |
Coolant Tank Capacity |
400 L |
|
Motor |
Hydraulic motor |
0.75 Kw (1HP) |
|
Coolant pump motor |
0.37 Kw (1/2HP) |
|
|
X-axis & Y-axis & Z-axis servomotor |
X：2.5Kw Z：2.5Kw | |
|
Wheel motor (kW) |
2.2 (3HP Brushless Servomotor) |
|
|
Spindle motor |
2.2，4P (3HP) |
|
|
Others |
Capacity of automation lubrication pump |
4 L |
|
Measurement (L*W*H)- with accessories |
4200x3100x2050 mm |
|
|
Machine Weight |
7300 kg |
|
Standard accessories |
|---|
|
CNC Controller |
|
Inverter for X-axis work piece motor |
|
Inverter for Z-axis work piece motor |
|
Z-axis grinding spindle |
|
Hydraulic chuck |
|
Hydraulic cylinder |
|
3-coloe pilot lamp |
|
Working lamp |
|
Tool box |
|
Automation lubrication pump |
|
Coolant tank and coolant pump |
|
Paper filter system |
|
Magnetic chips Conveyor |
|
Hydraulic unit with pump |
|
Heat exchanger for electrical cabinet |
|
Diamond Dresser |
|
Foundation bolts and blocks |
|
Mechanical, electrical operation manuals |
|
Full-enclosed cover |
