EQUIPTOP HITECH CORP.
Products
Specification
SPECIFICATIONS:
Model | Unit | UF-618/618M | |
Table Size | L x W | mm | 152x460 |
Max.grinding length | Longitudinal | mm | 480 |
Max.grinding width | Crosswise | mm | 178 |
Table loading | Max. loading | KGS | 160 |
Max. distance from table surface to spindle centerline | mm | 460 | |
Stadard magnetic chuck size | mm | 150x450 | |
Longitudinal movement of table | Max. travel, hydraulic | mm | 480 |
Max. travel, manual | mm | 510 | |
Max.travel,infinitelyvariable | m/min | 60HZ, 5-28m/min 50HZ, 5-23m/min |
|
Cross transverse travel | Auto transverse increment | mm | 0.5-10 |
Auto. Constant Feeding Speed | mm/min | 20-320 | |
Max. auto transverse travel | mm | 180 | |
Max. manual transverse travel | mm | 195 | |
Handwheel per Revolution | mm | 5 | |
Handwheel per Graduation | mm | 0.02 | |
Wheelhead verticalin feed | Automaticinfeed | mm | ASD: 0.001-0.4 ASDII: 0.001-0.1 |
Step feed (jog) | mm | - | |
Rapid travel, Approx | mm/min | - | |
Slow travel, Approx | mm/min | - | |
Handwheel revolution | mm | 1mm ASDII: Min. display value: 0.01mm (no elevating handwheel) | |
Handwheel graduation | mm | 0.005mm ASDII: Min. display value: 0.01mm (no elevating handwheel) | |
Grinding spidle drive | Speed | RPM | 60HZ, 3450 R.P.M. 50HZ, 2850 R.P.M. |
Power rating | HP | 2.0 | |
Standard grinding wheel | Diameter | mm | 203 |
Width | mm | Srandard 12.7 Max 19 |
|
Bore | mm | 31.75 | |
Hydraulic motor | Power rating | HP | 1 |
Crossfeed motor | Power rating | W | 40W ASDII: 500W |
Elevating motor | Power rating | W | - |
Floor space | Total space required | mm | 2942x2401x1733 |
Weights | Net weight, Approx. | KGS | 820 |
Gross weight, Approx. | KGS | 970 | |
Coolant system | Power rating | HP | 1/8 |
Rated power, Approx | Power rating | HP | 3.0 ASDII: 4.0 |
Packing dimensions | LxWxH | mm | 1880x1430x1960 |