Products
GENERAL FEATURES:
1.Column:
Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.
2.Construction:
Construction of table, saddle and base is casted with high grade iron, strongly ribbed.
3.Spindle:
Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.
4.Slideways:
Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy.
5.Automatic Continuous Lubrication System:
All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.
6.Cross Feed:
Ball screw for cross travel, powered by AC motor.
7.Hydraulic Table:
Table speed ranges 5-25m/min. With rack and pinion table drive for hand operation.
8.Proximity Switch:
Provide built-in-type (hidden) proximity switch, features safe and easy operation.
9.Table Speed Control:
Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time.
10.Hand Wheels:
Zero-setting slip-ring with vernier on vertical handwheel, and vernier on crossfeed handwheel.
SPECIFICATIONS:
1A: Longitudinal Hydraulic.
2A: Longitudinal Hydraulic And Crossfeed Motorized.
3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized.
ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.
MODEL |
ESG-3A1228 |
|
Table Size |
305x712mm(12x28") |
|
Max.grinding length |
Longitudinal |
712mm(28") |
Max.grinding width |
Crosswise |
330mm(13") |
Max. distance from table surface to spindle centerline |
Standard column:630mm(24 3/4"); Optional high column:720mm(28 5/16") |
|
Stadard magnetic chuck size |
300x700mm(11 3/4x27 1/2") |
|
Longitudinal movement of table |
Max. travel, hydraulic |
760mm(30") |
Max. travel, manual |
830mm(32 9/16") |
|
Max. travel,infinitely variable |
60HZ,5-25m/min,50HZ,5-20m/min |
|
Cross transverse travel |
Auto transverse increment |
1~25mm(0.04"-1") |
Max. auto transverse travel |
350mm(13 3/4") |
|
Max. manual transverse travel |
380mm(15") |
|
Handwheel per revolution |
5mm(0.2") |
|
Handwheel per graduation |
0.02mm(0.001") |
|
Sheelhead vertical infeed |
Automatic infeed |
0.001-0.04mm(0.00005-0.002") |
Step feed (jog) |
0.001mm(0.00005") |
|
Rapid travel, Approx |
150mm/min |
|
Slow travel, Approx |
6mm/min |
|
Handwheel revolution |
1mm(0.05") |
|
Handwheel graduation |
0.005mm(0.0005") |
|
Grinding spidle drive |
Speed |
60HZ,1750 R.P.M.; / 50HZ,1450 R.P.M. |
Power rating |
Standard:5HP; Optional:7 1/2HP,10HP |
|
Standard grinding wheel |
Diameter |
355mm(14") |
Width |
50mm(2") |
|
Bore |
127mm(5") |
|
Hydraulic motor |
Power rating |
3.0HPx6P |
Crossfeed motor |
Power rating |
80Wx6P |
Elevating motor |
Power rating |
1/4HPx6P |
Floor space |
Total space required |
2950x1970x2050mm(116x78x81") |
Weights |
Net weight, Approx. |
3020KGS(6644LBS) |
Gross weight, Approx. |
3520KGS(7744LBS) |
|
Rated power, Approx |
|
8 1/2HP(Spindle motor:5HP) 11HP(Spindle motor:7.5HP), 13 1/2HP(Spindle motor:10HP) |
Packing dimensions |
L x W x H |
2500x2290x2200mm(99x90x88") |
NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.
|
|
|
|
|||||
|
|
|