Products
FEATURES
1. DESIGN
CHENTA gear units are a modularized design with following advantages:
‧ More sizes are available with a reduced variety of parts.
‧ Higher operational reliability combined with a increased capacity of power.
2. MOUNTING
CHENTA gear units can be supplied for either horizontal or vertical installation; other arrangements are also possible on request.
3. NOISE BEHAVIOR
CHENTA gear units are designed with an improvement of noise-emission:
‧ High precision gears with grinding.
‧ Designing a robust configuration of housing for a better noise-absorbing.
4. THERCAL CONDUCTION
CHENTA gear units not only have a high efficiency but also a favorable thermal conduction:
‧ An enlarged housing surface area.
‧ Applied with a larger fan incorporating the new style of air conduction fan cowl.
H/B series-H1 | ||||
---|---|---|---|---|
Size | Output-Shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
3 | 60 | 3.3 | 1.25 | 5.60 |
5 | 85 | 9.6 | 1.25 | 5.60 |
7 | 105 | 17.8 | 1.25 | 5.60 |
9 | 125 | 28.7 | 1.25 | 5.60 |
11 | 150 | 50.6 | 1.60 | 5.60 |
13 | 180 | 77 | 1.60 | 5.60 |
15 | 220 | 130 | 2.00 | 5.60 |
17 | 240 | 173 | 2.80 | 5.60 |
19 | 270 | 245 | 4.00 | 5.60 |
H/B series-H2 | ||||
---|---|---|---|---|
Size | Output-Shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
4 | 80 | 6.7 | 6.30 | 22.40 |
5 | 100 | 11.2 | 6.30 | 22.40 |
6 | 110 | 14.4 | 8.00 | 28.00 |
7 | 120 | 20.3 | 6.30 | 22.40 |
8 | 130 | 25.6 | 8.00 | 28.00 |
9 | 140 | 33.7 | 6.30 | 22.40 |
10 | 160 | 42.2 | 8.00 | 28.00 |
11 | 170 | 59.3 | 6.30 | 22.40 |
12 | 180 | 73.8 | 8.00 | 28.00 |
13 | 200 | 86 | 6.30 | 20.00 |
14 | 210 | 107 | 8.00 | 25.00 |
15 | 230 | 143 | 6.30 | 20.00 |
16 | 240 | 160 | 7.10 | 22.40 |
17 | 250 | 195 | 6.30 | 20.00 |
18 | 270 | 230 | 7.10 | 22.40 |
19 | 290 | 292 | 6.30 | 22.00 |
20 | 300 | 335 | 7.10 | 22.40 |
21 | 320 | 410 | 7.10 | 20.00 |
22 | 340 | 458 | 8.00 | 22.40 |
H/B series-H3 | ||||
---|---|---|---|---|
Size | Output-shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
5 | 100 | 11.6 | 25.00 | 90.00 |
6 | 110 | 15.5 | 31.50 | 112.00 |
7 | 120 | 21.7 | 25.00 | 90.00 |
8 | 130 | 27.2 | 31.50 | 112.00 |
9 | 140 | 35.7 | 25.00 | 90.00 |
10 | 160 | 43.8 | 31.50 | 112.00 |
11 | 170 | 63.5 | 25.00 | 90.00 |
12 | 180 | 77.2 | 31.50 | 112.00 |
13 | 200 | 88 | 22.40 | 90.00 |
13 | 200 | 88 | 22.40 | 90.00 |
14 | 210 | 109 | 28.00 | 112.00 |
15 | 230 | 153 | 22.40 | 90.00 |
16 | 240 | 173 | 25.00 | 100.00 |
17 | 250 | 200 | 22.40 | 90.00 |
18 | 270 | 240 | 25.00 | 100.00 |
19 | 290 | 300 | 22.40 | 90.00 |
20 | 300 | 345 | 25.00 | 100.00 |
21 | 320 | 420 | 22.40 | 90.00 |
22 | 340 | 470 | 25.00 | 100.00 |
H/B series-H4 | ||||
---|---|---|---|---|
Size | Output-Shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
7 | 120 | 21.7 | 100.00 | 355.00 |
8 | 130 | 27.2 | 125.00 | 450.00 |
9 | 140 | 35.7 | 100.00 | 355.00 |
10 | 160 | 44.2 | 125.00 | 450.00 |
11 | 170 | 61.6 | 100.00 | 355.00 |
12 | 180 | 78 | 125.00 | 450.00 |
13 | 200 | 90.7 | 100.00 | 355.00 |
14 | 210 | 113 | 125.00 | 450.00 |
15 | 230 | 153 | 100.00 | 355.00 |
16 | 240 | 173 | 112.00 | 400.00 |
17 | 250 | 200 | 100.00 | 355.00 |
18 | 270 | 240 | 112.00 | 400.00 |
19 | 290 | 300 | 100.00 | 355.00 |
20 | 300 | 345 | 112.00 | 400.00 |
21 | 320 | 420 | 100.00 | 355.00 |
22 | 340 | 470 | 112.00 | 400.00 |
H/B series-B2 | ||||
---|---|---|---|---|
Size | Output-Shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
4 | 80 | 6.2 | 5.00 | 11.20 |
5 | 100 | 9.4 | 5.00 | 11.20 |
6 | 110 | 12 | 6.30 | 14.00 |
7 | 120 | 19 | 5.00 | 11.20 |
8 | 130 | 23.8 | 6.30 | 14.00 |
9 | 140 | 29.9 | 5.00 | 11.20 |
10 | 160 | 38 | 6.30 | 14.00 |
11 | 170 | 54 | 5.00 | 11.20 |
12 | 180 | 66.3 | 6.30 | 14.00 |
13 | 200 | 81.1 | 5.00 | 11.20 |
14 | 210 | 101 | 6.30 | 14.00 |
15 | 230 | 132 | 5.00 | 11.20 |
16 | 240 | 148 | 5.60 | 12.50 |
17 | 250 | 195 | 5.60 | 11.20 |
18 | 270 | 230 | 7.10 | 12.50 |
H/B series-B3 | ||||
---|---|---|---|---|
Size | Output-Shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
4 | 80 | 6.7 | 12.50 | 71.00 |
5 | 100 | 11.6 | 12.50 | 71.00 |
6 | 110 | 15.5 | 16.00 | 90.00 |
7 | 120 | 21.7 | 12.50 | 71.00 |
8 | 130 | 27.2 | 16.00 | 90.00 |
9 | 140 | 35.7 | 12.50 | 71.00 |
10 | 160 | 43.8 | 16.00 | 90.00 |
11 | 170 | 63.5 | 12.50 | 71.00 |
12 | 180 | 77.2 | 16.00 | 90.00 |
13 | 200 | 90.7 | 12.50 | 71.00 |
14 | 210 | 113 | 16.00 | 90.00 |
15 | 230 | 153 | 12.50 | 71.00 |
16 | 240 | 173 | 14.00 | 80.00 |
17 | 250 | 200 | 12.50 | 71.00 |
18 | 270 | 240 | 14.00 | 80.00 |
19 | 290 | 300 | 12.50 | 71.00 |
20 | 300 | 345 | 14.00 | 80.00 |
21 | 320 | 420 | 12.50 | 71.00 |
22 | 340 | 470 | 14.00 | 80.00 |
H/B series-B4 | ||||
---|---|---|---|---|
Size | Output-Shaft [mm] | M2 [Nm] Max | I - Min | I - Max |
5 | 100 | 11.6 | 80.00 | 315.00 |
6 | 110 | 15.5 | 100.00 | 400.00 |
7 | 120 | 21.7 | 80.00 | 315.00 |
8 | 130 | 27.2 | 100.00 | 400.00 |
9 | 140 | 35.7 | 80.00 | 315.00 |
10 | 160 | 44.2 | 100.00 | 400.00 |
11 | 170 | 61.6 | 80.00 | 315.00 |
12 | 180 | 78 | 100.00 | 400.00 |
13 | 200 | 90.7 | 80.00 | 315.00 |
14 | 210 | 113 | 100.00 | 400.00 |
15 | 230 | 153 | 80.00 | 315.00 |
16 | 240 | 173 | 90.00 | 355.00 |
17 | 250 | 200 | 80.00 | 315.00 |
18 | 270 | 240 | 90.00 | 355.00 |
19 | 290 | 300 | 80.00 | 315.00 |
20 | 300 | 345 | 90.00 | 355.00 |
21 | 320 | 420 | 80.00 | 315.00 |
22 | 340 | 470 | 90.00 | 355.00 |