Products
FEATURES
The major machine parts, such as the base, saddle, headstock,slide and tailstock are made of Meehanite cast iron and tempered to relieve stress there by ensuring lifetime accuracy.
High performance servomotors are directly coupled to the pre-ten sioned ball screws.
Linear guideway on the X and Z axis.
45 degrees slant bed construction features efficient chip removal and firm support.
SPECIFICATION
Swing over bed | Ø 460 mm ( 18.11" ) |
---|---|
Max turning diameter | Ø 280 mm ( 11.02” ) |
Working length | 455 mm ( 17.9” ) 690 mm ( 27.16" ) |
Spindle nose | A2 - 6 |
Bar capacity | Ø 52 mm ( 2” ) |
Hydraulic chuck | Ø 210 mm ( 8” ) |
X axis travel | 165 mm ( 6.49” ) |
Z axis travel | 490 mm ( 19.3” ) 740 mm ( 29.13" ) |
STANDARD ACCESSORIES
Feature
- Major machine parts, such as base, saddle, headstock, slide and sub spindle are made of Meehanite cast iron. They are tempered to relieve stress thereby ensuring lifetime accuracy.
- High performance servo motors are directly coupled to the pre-tensioned ball screws.
- Linear guide way on X and Z axes has fewer friction and faster feed rate.
- ox guide way on B axis has higher rigidity.
- 45 degrees slant bed constriction features efficient chip removal and firm support.
Controller : FANUC、SIEMENS、FAGOR
FANUC Controller (Std.)
SIEMENS Controller (Opt.)
FAGOR controller (Opt.)
SKF Precision Spindle and P4 precision bearings :
The cartridge type is conveniently removed allowing for convenient servicing. The spindle runs on class P4 precision bearings providing high axial thrust capability and superior radial stability. This ensures high precision during heaving duty turning.
Fast Turret Indexing :
FCL - TS / TT series turret
The 12 position turret features bi-directional random tool selection. Fast indexing time is 0.6 seconds.
FCL - S series : hydraulic turret
Twin spindle series enables the entire workpiece to be machined at one time.