KN-PLUS / Coolant Purifying Machine remove tramp oils / Depending on the type of processing fluid, the lubricating oil and grease used on the machine will be emulsified by the metal cutting fluid or floated on the surface of the working fluid in a "slick" manner. In either case, oil slick or foreign oil can cause failure of the working fluid. The "cutting fluid oil water purification cycle machine" developed by King Nice Technology can effectively separate the skid oil on the surface of the water tank, filter impurities and emulsified substances, and reduce the bad odor generated by the fusion of the cutting fluid. It can also reduce the oil stain caused by oil mist and liquid splash, which is attached to the machine and work, avoid the stimulation and allergies caused by the skin contact of the staff, and improve the processing precision and save the tool wear. Applicable to all types of machine cutting fluids and scrape the oil slick oil-water separation, in order to increase the life of cutting water.

____________________________________________________________________________________________________________________________________________________________________________


▎Use Value reduce the CNC machine failure rate , processing non-performing rate.
▎Water and Coolant Saving.
▎Reduce the cost of CNC mechanical downtime and personnel operations.
▎Maintain the tank liquid caoacity , reduce the temperature

____________________________________________________________________________________________________________________________________________________________________________

【 Product Features 】

● It can effectively separate the slide oil,foreign matter oil,etc.on the surface of the water tank.Reduce the foul smell produced by the fusion of cutting fluid.
● Reduce oil mist and liquid fly rafts causing grease on machinery and workpieces.Free from skin irritation and allergies.
● No need to discharge,can reduce the amount of waste oil and wastewater treatment.
● Reduce workpiece corrosion,rust,improve machining accuracy and extend tool life.
● Purify cutting fluid to stabilize its quality,extend life and improve processing efficiency.
● Filter impurities such as suspended solids to prevent backlash form affecting the surface of the motor and theworkpiece.
● Stop theproduction of anaerobice bacteria and reduce the frequency of changing cutting fluid.
● Reduce the failure rate of pipe and motor blockage.
● Reduce labor costs and cleaning time for cutting fluids .Save processing costs for waste oil recovery.

　Contact Supplier

Add to Favorites