KN-V300 / Water tank chip、powder、iron, aluminum, copper chip suction filter/ Use the suction spout to safely remove coolants, chips and swarf, the high-power pump delivers sufficient suction to cut the cleaning times for the machine and emulsions to a minimum. In recent years, water pollution incidents have spread frequently. In order to prevent the environment from being damaged and polluted, the environmental protection equipment deployed in various precision machinery and production lines has been paid more and more attention. There are many owners of processing industries who maintain water tanks. Maintenance is very headache. There is a metal processing company in the middle of the factory, which uses full oil processing in the factory. Due to long-term accumulation, a thick layer of processed chips and sediment is deposited at the bottom of the water tank. Customers have strict requirements on the processing quality, but too many impurities and suspended solids in the water tank will lead to an increase in the defective rate of processing. Therefore, I hope that the oil can be filtered and cleaned in order to solve the problem of bottom debris to reduce the time and cost of cutting fluid replacement expenditure.
_____________________________________________________________________________________________________________________________________________________________

▎Use Value reduce the CNC machine failure rate , processing non-performing rate.
▎Water and Coolant Saving.
▎Reduce the cost of CNC mechanical downtime and personnel operations.
▎Maintain the tank liquid caoacity , reduce the temperature rise.

___________________________________________________________________________________________________________________________________________________________

【 Product Features 】

● To solve the cutting of iron filings,aluminum powder,fine sediment...and other long-time deposition in the CNC water tank troubled.
● Take the air pressure drive way, to avoid pubilc security problems.
● Widely used in metal cutting, aluminum processing,grinding problems,engineering plastics Patented technology-easy to deal with oily and water-soluble cutting fluid.
● patented technology - special dehydration drying method, can clean CNC water tank.
● processing liquid, sludge can also be a short time to cleat.
● the maximun filter accuracy can to 1 um.

　Contact Supplier

Add to Favorites