Products
7 Axes Swiss Turn Machine
New Big Bore Swiss vailable.
The Max. 2" (50.8mm) machining dia.
Non Guide Bush and Guide Bush system available (switch time 30min.)
3 High precision NSK bearings for main spindle.
Hydraulic clamping system
W series and SW series can process milling, tapping, drilling, and turning complexity parts for medial parts (especially for bone screw), electrical parts, automobile, clock/ watch, and aerospace..., etc.. Main and Sub spindle synchronous machining can save time cost.
FANUC and Mitsibishi controller system.
Specification
Process Capacity:
Item | Unit | Max. Capacity | Remark |
Main/ Sub spindle Max. drilling | mm | Ø13 | SUS303 |
Main/ Sub spindle Max. tapping | mm | M12 / P1.75 | SUS303 |
Cross live tool Max. drilling | mm | Ø12 | SUS303 |
Cross live tool Max. tapping | mm | M10 / P1.5 | SUS303 |
Sub spindle face live tool Max. drilling | mm | Ø12 | SUS303 |
Sub spindle face live tool Max. tapping | mm | M10 / P1.5 | SUS303 |
*Test by FANUC system
Specification Table
Main structure:
Item |
Unit |
SW527 |
Remark |
Max. turning dia. |
mm |
Ø50.8 (2”) |
|
Max. turning length (Rotary) |
mm |
300 |
|
Max. turning length (Fixed) |
mm |
350 |
|
Max. turning length (Non guide bush) |
mm |
127 |
|
OD tooling holder |
pcs |
5 |
□20 |
ID tooling holder |
pcs |
5 |
Ø25 |
Cross live tooling holder |
pcs |
3 |
ER-20 |
Cross live tooling holder |
pcs |
2 |
ER-16 |
Face live tooling of sub spindle holder |
pcs |
4 |
ER-20 |
Sub spindle aside drilling tooling holder |
pcs |
2 |
Ø25 |
No. of axis controls (with C axis) |
pcs |
7 |
|
C axis control minimum |
degree |
0.001° |
|
Max. main spindle speed |
rpm |
5000 |
|
Max. sub spindle speed |
rpm |
5000 |
|
Rapid traverse of X1/X2/Z1/Z2/Y1 |
M/min |
30 |
|
Main spindle motor |
KW |
11 |
Built-in |
Sub spindle motor |
KW |
11 |
Built-in |
Main spindle cooling |
pcs |
Oil cooling |
|
Sub spindle cooling |
pcs |
Oil cooling |
|
Main spindle clamping system |
pcs |
Hydraulic |
|
Sub spindle clamping system |
pcs |
Hydraulic |
|
Cross live tooling motor |
KW |
2.5 / 6000rpm |
|
Face live tooling motor of sub spindle |
KW |
2.5 / 6000rpm |
|
Lubrication tank |
L |
2 |
|
Air compressed pressure |
Mpa |
0.6 |
※ 1 |
Air compressed flow |
L/min. |
10 |
|
Machine dimension L x W x H |
mm |
2945 x 1665 x 2130 |
※2 |
Coolant tank |
L |
380L(100%) |
※3 |
Weight |
KG |
4480 |
※2 |
※ 1. 0.6Mpa = 6kg/cm2
※ 2. Without coolant tank and pumps
※ 3. At least 90% full for machining
※ All specification are subject to change without notice.