19YRS
GOUSHIN MACHINERY TOOLS CO., LTD.
Products
Double Column Machining Center
DB 2800 X: 3, 4, 5, 6, 8, 10m
DB 2800
For vertical machining center use Gear Head:#50 Spindle |
Long Spindle Nose(Gear Driver) |
Specification
DB 28300 | DB 28400 | DB 28500 | |
---|---|---|---|
Table Size | 2500 x 3000 mm | 2500 x 4000 mm | 2500 x 5000 mm |
X-Axis Travel | 3200 mm | 4200 mm | 5200 mm |
Y-Axis Travel | 2800 mm | 2800 mm | 2800 mm |
Z-Axis Travel | 800 (1000, 1200) mm | 800 (1000, 1200) mm | 800 (1000, 1200) mm |
DB 28600 | DB 28800 | DB 281000 | |
---|---|---|---|
Table Size | 2500 x 6000 mm | 2500 x 8000 mm | 2500 x 10000 mm |
X-Axis Travel | 6200 mm | 8200 mm | 10200 mm |
Y-Axis Travel | 2800 mm | 2800 mm | 2800 mm |
Z-Axis Travel | 800 (1000, 1200) mm | 800 (1000, 1200) mm | 800 (1000, 1200) mm |
Features
- Full Meehanite cast iron structure, columns, bridge and bed.
- Ultra Wide column structure (500mm*1000mm).
- Directly connected Y, Z ball screw and AC servo motors.
- Gear Box connected X ball screw and AC servo motors.
- Twin hydraulic cylinders balance system.
- Stepped design Y-axis.
- Mitsubishi M 720A series Controller. 10.4“ LCD screen.
- 55mm*4 linear guide ways on X-axis.
- 65mm*2 linear guide ways on Y-axis.
- Heavy Duty Box way column on Z-axis.
- BT-50 Gear Box Precision spindle taper.
- 6.000rpm two-step gear type spindle.
- 18.5/22KW Spindle Motor
- Up to 9, 7, 4.5 KW X, Y, Z Axis Servo Motors (DB28600)
- 15,15,12M/min rapid travers on X, Y, Z axis.
- Up to 80, 63, 50 X, Y, Z Axis Ball Screw Diameter (DB28600)
- P4 Class bearings.
- 32 tools Arm type ATC.
- Two Screw Type, One Link Type Chip Conveyor.
|
|
Controller; -Mitsubishi M730 -Fanuc OIMD -Fanuc 31B -Heidenhain ITNC 530Spindle; -BT 50 10.000rpm Direct Drive |
Coolant Through Spindle 20 Bar (CTS)
-Paper Filter and Water Tank
Air Through Spindle (ATS)
Spindle Jet Coolant Around Spindle
Z axis travel up grade to 1000mm
32 Tools Arm Type ATC
Enclosed splash guard with roof
AC for electrical cabinet
X,Y,Z Linear Scale
Touch Probe Measurement System
Tool Probe Measurement System
Interface preparation for fourth axis
Rotary Table