Products
MCV 1680, 1686, 2096 Series vertical machining center structure of 45 mm four sliding table and linear guide ways on Y axis, providing heavy loading capability. These models are specially customized processing of middle-large scale components and parts. It is suitable for the parts processing with high precision, such as milling, drilling, tapping and mold finishing. Key facility in industries of general machinery, car parts, aviation and mold makers.
MCV 1680 | MCV 1686 | MCV 2096 | |
---|---|---|---|
Table Size | 1800 x 800 mm | 1800 x 830 mm | 2200 x 900 mm |
X-Axis Travel | 1600 mm | 1600 mm | 2000 mm |
Y-Axis Travel | 800 mm | 860 mm | 960 mm |
Z-Axis Travel | 750 mm | 700 mm | 750 mm |
Features
- Meehanite cast iron.
- Mitsubishi M 70A series Controller. 8.4“ LCD screen.
- 55mm*4 linear guide ways on Y-axis.
- Heavy-duty box way column on Z-axis.
- BT-50 Precision spindle taper.
- 6.000rpm, Two Step Gear Box.
- 15/18.5KW Spindle Motor
- Up to 7, 7, 4.5 KW X, Y, Z Axis Servo Motors Rate (model 2096)
- 24,24,15M/min rapid travers on X, Y, Z axis.
- Up toφ63, 63, 50 X, Y, Z Axis Ball Screw Diameter (model 2096)
- P4 Class bearings.
- Directly connected ball screw and AC servomotors.
- 24 tools Arm type ATC.
- Screw Type Chip Conveyor
Specifications
|
|
Controller;
-Mitsubishi M720
-Fanuc OIMD Alpha
-Heidenhain ITNC 530
Spindle;
-BT 40 10.000rpm Direct Drive (15/18.5 KW)
-BT 40 12.000rpm Direct Drive (11/15KW)
-BT 40 15.000rpm Direct Drive (7.5/11KW)
-BT 50 10.000rpm Direct Drive (15/18.5 KW)
Coolant Through Spindle 20 Bar (CTS)
-Paper Filter and Water Tank
Air Through Spindle (ATS)
Inner Water Flushing System with Water Pressure Pump
Spindle Jet Coolant Around Spindle
Link Type Chip Conveyor
Linear Guide Way Z Axis
-Piston Supported Z axis
Counter- balance Weight System