Products
FV Series vertical machining center adopts the moving structure of cross sliding table and linear guide ways on three axis. Specially customized processing of small scale complicates parts. It is suitable for the parts processing with high precision, such as milling, drilling, tapping and mold finishing.
Key facility in industries of general machinery and mold makers.
FV 7 | FV 10 | FV 12 | FV 16 | FV 20 | |
---|---|---|---|---|---|
Table Size | 800 x 400 mm | 1100 x 500 mm | 1300 x 640 mm | 1700 x 700 mm | 2100 x 800 mm |
X-Axis Travel | 750 mm | 1050 mm | 1200 mm | 1600 mm | 2000 mm |
Y-Axis Travel | 420 mm | 530 mm | 650 mm | 750 mm | 800 mm |
Z-Axis Travel | 560 mm | 520 mm | 620 mm | 700 mm | 750 mm |
Features
- Meehanite cast iron.
- Mitsubishi M 70A series Controller. 8.4“ LCD screen.
- 30mm*2 linear guide ways base on three axes.
- BT-40 Precision spindle taper.
- 10.000rpm belt drive rigid spindle.
- 5.5/7.5KW Spindle Motor
- 1.6, 1.6, 3KW X, Y, Z Axis Servo Motors Rate
- 48M/min rapid travers on X, Y, Z axis.
- φ32,32,32 X, Y, Z Axis Ball Screw Diameter
- P4 Class bearings.
- Directly connected ball screw and AC servo motors.
- 24 tools Arm type ATC.
- Screw Type Chip Conveyor
|
|
Controller;
-Mitsubishi M720
-Fanuc OIMD Alpha/ Beta
Spindle;
-BT 30 20.000rpm Buildin Motor
-BT 40 12.000rpm Direct Drive
-BT 40 15.000rpm Direct Drive
Coolant Through Spindle 20 Bar (CTS)
-Paper Filter and Water Tank
Air Through Spindle (ATS)
Inner Water Flushing System with Water Pressure Pump
Spindle Jet Coolant Around Spindle
Link Type Chip Conveyor