886-4-23921001
886-4-23921037
No. 52, Charn An East Rd., Taiping Dist., Taichung City 41152, Taiwan
www.first.com.twProducts
MEEHANITE CASTING STRUCTURE
 |
|---|
 |
|---|
SPINDLE UNIT
|
MILLING HEAD GEAR AND QUILL
Harden and ground spindle, quiet and smooth, free of noise and vibration.
Use dynamically balanced pulleys and precision bearings.
2HP to 3HP spindle motor are available.
Spindle back gear running in grease packed housing ensure fatigue strength and low noise.
Chrome coated and mirror ground finished quill.
|
|
|
|---|
RIGID HEAD TILTING SYSTEM
The heaf knuckle is our design patent. This structure greatly increase the stability and rigidity, when vertical head titled at all angles, front and back to perform complicated work. There are 6 T-bolts to lock the knuckle to the Ram instead of 3 bolts.
ADJUSTABLE BACKLASH NUT
Unique double nuts and backlash adjusting design, contact face enlarged ensuring accuracy over term and easy for backlash adjustment.
| SPECIFICATION |
|---|
| MODEL | LC-1 1/2 VS | LC-1 1/2 TM | |
| Travel | |||
| Longitudinal Travel | 762 mm (30") / Opt: 966 mm (38") | ||
| Cross travel | 305 mm (12") | ||
| Vertical travel | 406 mm (16") | ||
| Table | |||
| Working surface | 1,067 mm X 230 mm (42" X 9") / Opt: 1,270mm (50") | ||
| Working surface to ground A01 | 820 ~ 1,226 mm (32.3 ~ 48.3") | ||
| Max. load | 200 Kg | ||
| T-slots (no. x width x pitch) | 3 X 15.875 mm X 63.5 mm (3 X 0.625" X 2.5") | ||
| Machine size | |||
| Length A02 | 1,600 ~1,905 mm (63 ~ 75") | ||
| Width A03 | 1,467 mm (57.8") | ||
| Height A04 | 2,100 mm (82.7") | 2,000 mm (78.7") | |
| Weight | 1,010 kgs (2,222 lbs) | ||
| Coolant pump | O | ||
| Vertical spindle | |||
| Milling head | VS | TM | |
| Quill swivel (R&L/90°) B01 | V | V | |
| Quill swivel (F&B) B02 | +45° ~ -38° | ±45° | |
| Spindle nose to working surface B03 | 0 ~ 469 mm (0 ~ 18.5") | ||
| Spindle centerline to column B04 | 171~ 476 mm (6.75"~18.75") | ||
| Overarm travel B05 | 305 mm (12") | ||
| Overarm swivel | 360° | ||
|
|
|---|
| Milling head specification | |||
| Milling Head | VS | TM | |
| Spindle Taper | R8 or NST 30 | R8 or NST 30 | |
| Spindle Motor(3Ph) | 2 HP | 2 HP | |
| Quill Diameter | 85.7 mm | 85.7 mm | |
| Quill Travel | 127 mm (5 ") | 127 mm (5 ") | |
| Vertical Feeds | 0.04/0.08/0.16 mm | 0.04/0.08/0.16 mm | |
| Spindle Speed | 50 HZ | 50~3,750 rpm (Variable) | 60~2,280 rpm (8 Steps) |
| 60 HZ | 60~4,500 rpm (Variable) | 80~2,760 rpm (8 Steps) | |
| Inverter (Option) | O | X | |
| Bigger spindle motor (Option) | 3 HP | 3 HP | |
| Single phase motor (Option) | O | O | |
| 2 speed motor (Option) | X | O | |
| Accessories | ||
| Machine Type | LC1-1/2VS | LC1-1/2TM |
| X and Y axis ballscrews (grade C5) | O | O |
| Power feed system | O | O |
| 8 Speed gear box feed system | O | O |
| 50" long table | O | O |
| Chromed bedways | O | O |
| Scales | O | O |
| Coolant system | O | O |
| Coolant tray | O | O |
| Automatic lubrication system | O | O |
| Halogen light with electric box | O | O |
| 4"(100mm) or 7"(178mm) riser block | O | O |
| Air power drawbar (Vertical) | O | O |
| Tapping Unit | O | O |
| * Specifications may different according to option accessories and are subject to change without notice. V: Standard ; O: Option ; X: Not Available |
|---|
