Products
Rigid tapping 4000 RPM.
Direct drive spindle for high speed machining, excellent accuracy and best performance of spindle motor.
Optional arm type ATC with high efficiency of tool changing.
Standard roller bearings linear guide ways offer stability while high-speed 3 axes movements.
MEEHANITE casting structure absorbs vibration to maintain rigidity.
|
---|
SPECIFICATION |
---|
MODEL | VT18 | |
---|---|---|
Travel | ||
X-Axis | 450 mm(17.71") | |
Y-Axis | 300 mm(13.77") | |
Z-Axis | 14T: 360 mm (14.17") | 20T: 385 mm (15.15") / 485 mm (9.29") (option) |
Spindle nose to table | 180 mm (7.08") | |
Table | ||
Table size | 500 mm x 350 mm (19.68~13.77") | |
Floor to table | 850 mm (33.46") | |
Max. table loading capacity | 150kgs (330 Lbs) | |
T-slot (number x width x pitch) | 3 x 18 mm x 100 mm(3x0.7" x 3.93") | |
Spindle center to column | 417 mm (16.41") | |
Feed system | ||
Rapid traverse speed | X/Y/Z: 48 / 48 / 36 M/min | |
Feed motor (FANUC) | (FANUC) X/Y : β4i-4000X / Z: β8i-3000X | |
Ball screw diameter & pitch | X: 25mm / 12mm (0.98/0.47") Y: 25mm / 12mm (0.98/0.47") Z: 30mm / 12mm (1.18/0.47") | |
Cutting feed rate | 12 mm/min("/min) | |
Type of transmission | Direct mounting | |
Spindle | ||
Type of tool shank | BT 30 / DIN 30 | BT 30 / DIN 30 |
Max. spindle speed | FANUC: 10000 / 15000 rpm (Option: CTS) | |
Spindle motor | FANUC: β3-10000i / œ T2-15000i rpm | |
Type of transmission | Direct Drive | |
ATC | ||
Tool storage capacity | 14 T | 20 T (Option) |
ATC type | Turret Type | Arm Type |
Max. tool diameter | 90 mm (3.54") | 69 mm (2.72") |
Without adjacent tool | 150 mm (5.9") | 135 mm (5.31") |
Max. tool length | 200 mm (7.87") | 200 mm (7.87") |
Max. tool weight | 3 kg (6.61 Lbs) | 3 kg (6.62 Lbs) |
Tool changing time (Tool to Tool) | 1.8 sec | 0.7 sec |
Tool changing time (Chip to Chip) | 2.8 sec | 2 sec |
Method of tool selection | By address code | Random selection |
bi-directional magazine rotation | ||
Tool display | None | |
Special tool management | Yes (except FANUC 0l-Mate D) | |
Coolant system | ||
Coolant tank size | 200 L | |
Coolant capacity | 150 L / min | |
Chip Flush capacity | 150 L / min | |
Machine size | ||
Machine height | 2145 mm (84.4") | |
Floor space | 1500 x 2159 mm (59" x 85") | |
Weight | 2600 kgs (5320 Lbs) | |
Power source | ||
Electrical power supply | 10 KVA / 3 PH , 220V 50/60HZ | |
Compressed air supply | 6.0 kgf/cm² (85psi (0.6MPa) | |
Controller | ||
FANUC |
Edition / A01 |
---|
* Specifications may different according to option accessories and are subject to change without notice. |
|
|
---|