Products
5 - AXIS MACHINING CENTER
The major structure parts are manufactured from high quality Meehanite cast iron, tempered for stress relief. The spindle head elevation employs a pneumatic type balance system to minimize the spindle head vibration during moving.
The 5-axis synchronized machining saves machining time reduces repetitive workpiece setup and error,while dramatically increasing machining and accuracy.
Pinnacle AX320/ AX450 are proven to be super machines for high efficiency and accuracy.
Features
760 x 610 x 560 mm Travel
A Axis Tilt 220° (±110°)
C Axis Rotary 360°
Rapid Feedrate 30/30/24
9/12 Kw Spindle Motor
ISO40 Spindle Taper
X, Y & Z Axis Linear Way
Rigid, Stable, Accurate
RUGGEDLY CONSTRUCTED THROUGHOUT TO PROVTDE LIFETIME ACCURACY YEAR AFTER YEAR
The major structural parts are manufactured form high quality Meehanite cast iron (GB 300), tempered for stress relief with hardness over 190HB.
Roller type linear ways on X, Y, Z axis increased stability.
X, Y, Z axis are transmitted with class C3, Ø40mm ball screws.
COOLANT THROUGH BALL SCREW (STANDARD)
Coolant through ball screws on X, Y axis minimizes thermal deformation and backlash, while ensuring smooth motion during rapid traverse.
PNEUMATIC BALANCE SYSTEM
The Z-axis is pneumatic counter-balanced via high response pneumatic cylinders. Plus an air reservoir tank to boost the balancing performance, ensuring fast and stable Z-axis movement, giving high surface finish.
COOLING SYSTEM TO SPINDLE
The spindle oil cooler permits the spindle to keep a constant temperature running and ensures long service life. It also provides high efficiency machining and high accuracy.
TABLE | |
---|---|
Table Size (mm) | Ø450 |
Travel Ranges (X x Y x Z mm) | 760 x 610 x 560 |
T Slot Size (Size x deg ) | 14 x 45 |
Max. Table Load (0°/90°) | 300 /250 |
Max. Workpiece Size (W x H mm) | Ø600x 300 |
Diameter of Table Hole (mm) | Ø171 |
Spindle Nose to Table Surface (mm) | 50~565 |
A Axis, Tilt (deg)/(0.001°) | 220°(±110°) |
C Axis, Rotary (deg)/(0.001°) | 360° |
SPINDLE | |
Tool Shank & Pull Stud | ISO40 |
Spindle Inner Diameter (mm) | Ø70 |
Spindle Speed (rpm) Direct drive | 10000 (12000/15000) |
Spindle Speed (rpm) Built-in | 18000 (20000/24000) |
Main Motor (con/30 min Kw) | 9/12 |
AXIS SERVO MOTOR | |
Rapid Feed Rate (X/Y/Z m/min) | 30/30/24 |
Feed Rate (X/Y/Z/ m/min) | 10 |
Feed Rate (A/C rev/min) | 5.5/11.5 |
X Axis Rated Torque (Nm) | 10 |
Y Axis Rated Torque (Nm) | 10 |
Z Axis Rated Torque (Nm) | 10 |
A Axis Rated Torque (Nm) | 10 |
C Axis Rated Torque (Nm) | 10 |
AUTO TOOL CHANGER | |
ATC Type | DISK - 24,30(Chain-40) |
Cam Type | ARM |
Tool Selection (Bi-direction) | RANDOM |
Tool Storage Capacity (PCs) | 24 (30,40) |
Max. Tool Diameter (mm) | 90 (76) |
Max. Tool Length | 300 |
Max. Tool Weight | 8 |
MISCELLANEOUS | |
Air Requirement (Kg/cm2) | 6 |
Hydraulic Requirement (Kg/cm2, L) | 40, 30L |
Voltage | 380 |
Power Requirement (KVA) | 40 |
Coolant Tank Capacity (L) | 300 |
Machine Weight (KGs) | 7000 |
Machine Height (mm) | 2900 |
Floor Space (L x W mm) | 3100 x 2230 |
Packing Size (L x W x H mm) | 3100 x 2230 x 2560 |
All Specifications And Designs Are Subject To Change Without Notice.