HONG JI PRECISION MACHINERY LTD.
Products
Deep Hole Drilling Machine
Bed Type Deep Hole Drilling Machine
CNC ST-2000
The bed type drilling machine is under casting construction with maximum 2000mm of drilling length. The machine has 3 axis to work for different applications like aerospace parts, heat exchanger, plastic moulds or irregular components. The machine can also load for weight at maximum 15000kgs for your demands, and it can also meet your need of tapping and milling. The table below has more detail information, so please feel free and contact us for more information today!
Specification
Capacity
- Number of spindle: 1 No
- Range of drilling dia.: 3 ~ 25mm(Option:5~40mm)
- Max. depth of drilling: 2,000mm
- Feed range: 10 ~ 500 mm/min
- Spindle speed range: 0 ~ 6,000 rpm
Hydraulic system
- Coolant pump pressure range: 0 ~ 100 kg/cm2;
- Pump output: 30 ~ 60 L/min
- Coolant tank capacity: 1,200 L
- Worktable dimensions: 2,600 x 1,600mm
- Table cross travel(X-Axis): 2,200mm
- Spindle head vertical travel (Y-Axis): 1,200mm
- Effective stroke (Z-Axis): 2,000mm
- Spindle motor: 5.5 KW(Option:11KW)
- Z-Axis: 1.2 KW (Option:1.8KW)
- Y-Axis: 2.5 KW
- X-Axis: 2.5 KW
- Chip screw: 0.1 KW
- Coolant pump: 3.5 KW*1, 5.5KW*1
- Automatic lubrication: 0.25 KW
- Total machine power: 25 KW
- Max. weight on table: 15,000kgs
- Net weight: 18,000kgs
- Machine dimensions(Approx): 6,000 x 6,000 x 3,500mm
Standard accessories
- Paper filter
- Magnetic separator
- Chip and oil separator system
- High pressure oil pump
- Auto lubrication system
- Protecting drill torsion system
- Outer oil tank/Oil level gauge
- Tranformer
- Leveling screws & block
- Tool box / work light / alarm light
- Mechanical / Electrical operation manual
Special accessories
- Oil cooler
- Coolant oil
- Gundrill
- Guide bush
- Rubber bush
- Automatic Voltage stabilizer
- Fully enclosed guard
- Gundrill grinder
- Safety door interlock
- Oil mist collector
- Filtration housing
- Centrifuge
Features:
- CNC ST-2000 with CNC and 3-axis is designed for drilling big size molds and irregular components.
- The construction of CNC ST-2000 is all made by Cast iron.
- This type machines are suitable for the production of waterlines, heat and ejector pin holes of injection molds, hydraulic manifold and heat-exchangers which require multi hole drilling.
- Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenience for feed rate adjust.
- Hardened and ground main slide ways to hardness HRC 60. The opposite ways and gibes are all Turcite-B plated with hand scraped bearing surface.
- Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.
- CE requirement is available
- All Casting Construction
Applications- Coolant hole for moulds
- Injection hole for plastic moulds
- Automobile parts: Engine blocks
- Aerospace parts
- Heat exchanger
- Irregular components
Certificate:
- CE
Order Information:
- Minimum Order: 1
- Branded Product
- FOB: Taiwan Port