Products
HONG JI's new Deep-Hole Drilling Machine, CNC ST-3000. With drilling capacity from ø5mmto ø40mmand the max. drilling length3000mm, this bed type of machine is suitable for drilling water line of big plastic moulds, oil channel of spindle sleeve for heavy-duty turning machine and parts of hydraulic press machine. All axes are harden slide ways made by cast iron and done surface hardness to HRC60 to offer a stable performance as drilling big holes with3000mmlength. Equipped with high-precisionGermanybearings in spindle to offer stable spindle rotation to 6000RPM. Dimension of worktable is 3000x1000mmand be loaded 20tons components owing to200mmwidth of harden slide way of X-axe. 2 meters width of main column and two sub-columns to support Y-axe movement, hence, still processing is the same stable as drilling holes in high position of component. The machine structure is not only ridge but also strong, total weight of machine is 40tons. The table below has more detail information, so please feel free and contact us for more information today!
- Number of spindle: 1 No
- Range of drilling dia.: 5 ~ 40mm
- Max. depth of drilling: 3,000mm
Speed
- Feed range: 10 ~ 500 mm/min
- Spindle speed range: 0 ~ 6,000 rpm
Hydraulic system
- Coolant pump pressure range: 10 ~ 80 kg/cm2;
- Pump output: 30 ~ 60 L/min
- Coolant tank capacity: 1,600 L
Working table stroke
- Worktable dimensions: 3,000 x 1,000mm
- Table cross travel(X-Axis): 1,000mm
- Spindle head vertical travel (Y-Axis): 1,000mm
- Effective stroke (Z-Axis): 3,600mm
Drive motor
- Spindle motor: 7.5 KW
- Z-Axis: 1.8 KW
- Y-Axis: 2.5 KW
- X-Axis: 2.5 KW
- Chip screw: 0.1 KW
- Coolant pump: 5.5KW x 2
- Automatic lubrication: 51W
- Total machine power: 28 KW
- Max. weight on table: 20,000kgs
- Net weight: 40,000kgs
- Machine dimensions(Approx): 3,800 x 7,500 x 3,500mm
Standard accessories
- Paper filter
- Magnetic separator
- Chip and oil separator system
- High pressure oil pump
- Auto lubrication system
- Protecting drill torsion system
- Outer oil tank/Oil level gauge
- Tranformer
- Leveling screws & block
- Tool box / work light / alarm light
- Mechanical / Electrical operation manual
Special accessories
- Oil cooler
- Coolant oil
- Gundrill
- Guide bush
- Rubber bush
- Automatic Voltage stabilizer
- Fully enclosed guard
- Gundrill grinder
- Safety door interlock
- Oil mist collector
- Filtration housing
- Centrifuge
Features:
- CNC ST-3000 with CNC and 3-axis is designed for drilling big size molds and irregular components.
- This type machines are suitable for the production of waterlines, heat and ejector pin holes of injection molds, hydraulic manifold and heat-exchangers which require multi hole drilling.
- Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenience for feed rate adjust.
- Hardened and ground main slide ways to hardness HRC 60. The opposite ways and gibes are all Turcite-B plated with hand scraped bearing surface.
- Automatic lubrication pump is provided as standard accessory to ensure all bearing surface and screws are well lubricated.
- CE requirement is available
Applications
- Coolant hole for moulds
- Injection hole for plastic moulds
- Automobile parts: Engine blocks
- Aerospace parts
- Heat exchanger
- Irregular components
Order Information:
- Minimum Order: Negotiable
- Branded Product
- FOB: FOB Taiwan Ports