CAMEL PRECISION CO., LTD.
886-4-24615707
886-4-24618842
No. 64, Yu-Men Road, 407, Taichung, Taiwan
www.cml-motion.comProducts
Variable Displacement Vane Pump
Variable Displacement Vane Pump
VCM - SM
High efficiency, High-pressure, operation.
Extremely low vibration and noise level.
Instant and sharp cut-off characteristics.
Sturdy structure for high efficiency and long service life.
Easy adjustment in handling and maintenance.
Specification
| VCM | SM | 30 | C | 2 | 0 | * |
| Product Series | Serial No. | Displacement (L/Min) |
Pressure Range (Bar) |
Shaft Size | Body Type | Shaft Type |
| Vane Pump Series | SM Medium Pressure Variable Displacement Vane Pump | 30 | A: 15 - 35 | 2: ∮ 19.05mm | 0: PT 1: BSPP 2: NPT |
None: Standard |
| B: 20 - 70 | ||||||
| C: 50 - 105 | ||||||
| D: 70 - 140 | ||||||
| 40 | A: 15 - 35 | |||||
| B: 20 - 70 |
Remark: The pump displacement is the test value under 1800rpm.
View our website to search model code, technical data, performance curve and measurement
- The rotation of VCM-SM pump is clockwise when viewed from the shaft end.
- The drain pipe is directly connected to the oil tank and the position must be below the level of oil.
- Keep the suction pressure within -0.3 kgf/ cm² at the suction port.
- Pressure adjusting screw is turned clockwise to increase pressure and Counterclockwise to decrease pressure.
- Flow adjusting screw is turned clockwise to increase flow and counterclockwise to decrease flow.
- For proper alignment of pump and electric motor shaft, the eccentricity between them must be kept within 0.05mm and the eccentric angle error between them must be kept within 1°.
- When pressure is under 70 kgf/cm² the viscosity of oil must be within 30 50 cSt, when pressure is over 70 kgf/cm² the viscosity of oil must be within 50-70 cSt, at the temperature of 40 °C.
- When first time operation, the pump should be at no-load state-on delivery side and be repeated on and off the electric motor a number of times to make sure the air have been bled out of the system.
