2YRS
TOP-ONE MACHINERY CO., LTD.
Products
Vertical Machining Center - Linear Ways Series
Vertical Machining Center - Linear Ways Series / MCV-L540
MCV-L540
‧ X, Y, Z-axis travel 560 x 400 x 400 mm
‧ BT40 spindle taper
‧ The direct drive spindle provides 10,000, 12,000 or 15,000 rpm
‧ Linear ways on X, Y, Z-axis
‧ 16 Tools arm type automatic tool changer
‧ Fully enclosed splash guard
‧ Fanuc / Mitsubishi control system
‧ Spindle cooler is standard equipment
Application :
AEROSPACE SHIPBUILDING ENERGY SECTOR PETROCHEMICAL INDUSTRY APPLIANCES MICROMACHINING DIE & MOLD AUTOMOTIVE MEDICAL
Specification
FEATURES
Direct Drive Spindle
- The direct drive spindle provides 10,000, 12,000 or 15,000 rpm
- The spindle taper is BT40
- The high speed spindle dramatically upgrades machining efficiency and surface finish of cut
SPECIFICATIONS
Model | MCV-L540 |
---|---|
Table | |
Working surface | 420 x 700 mm |
T-slots (number x size x pitch) | 3 x 14 x 100 mm |
Max. table load | 300 Kg |
Travel | |
Longitudinal travel (X) | 560 mm |
Cross travel (Y) | 400 mm |
Headstock travel (Z) | 400 mm |
Distance between spindle end and table top | 325 - 725 (with raiser) mm / 130 - 530 (Standard type) mm |
Spindle | |
Type of tool shank | BT40 |
Spindle speeds | DDS 10000 (std.) RPM / 12000, 15000 (opt.) RPM |
Spindle speed range | 1 |
Spindle cooling / lubrication method | Oil / Grease lubrication |
Feed | |
Cutting feed | 1 ~ 10000 mm/min |
Rapid traverse (X / Y / Z) | 36 / 36 / 30 m/min |
Minimum input increment | 0.001 mm |
ATC | |
Type | Arm |
Tool holder | BT40 |
Tool storage capacity | 16 /20 tools |
Max. tool weight | 8 Kg |
Max. tool dia. of adjacent pots are empty | 150 mm |
Tool selection | Random |
Tool change time | 3 sec |
Motors | |
Spindle motor | 7.5 kW |
X axis | 1.6 kW |
Y axis | 1.6 kW |
Z axis | 3.0 kW |
Installation Requirements | |
Power | 15 KVA |
Voltage | 220 V / 50 Hz |
Pneumatlc pressure | 6-8 kg/cm² |
Pneumatlc flowrate | 100 L/min |
Floor space | 1850 x 2290 x 2650 mm |
Net weight | 2800 Kg |
*Note: Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
STANDARD ACCESSORIES
- Fanuc / Mitsubishi control system
- Fully enclosed splash guard
- Rigid tapping
- Automatic lubrication system
- RS-232 interface
- Work lamp
- Automatic power off
- Spindle air blast
- Leveling bolts & pads
- Electrical handwheel
- Tool box with tools & operation manual
- Call light
- Table guard
- Oil circulating cooling system for spindle
- Transformer
- Heat exchanger for electrical cabinet
- Oil pressure box (for gear head)
OPTIONAL ACCESSORIES
- Arm ATC (16 / 20 / 24 Tools)
- Rotary table (4th axis)
- Chip conveyor
- Export packing
- Oil water separating tank