2YRS
TOP-ONE MACHINERY CO., LTD.
Products
Vertical Machining Center - Linear Ways Series
Vertical Machining Center - Linear Ways Series / MCV-L1100
MCV-L1100
‧ X, Y, Z-axis travel 1100 x 520 x 560 mm
‧ BT40 spindle taper
‧ Belt drive: 8,000 rpm (standard)
‧ Direct Drive: 10,000, 12,000, 15,000 rpm (option)
‧ Linear ways on X, Y, Z-axis
‧ Arm type: 20/24 Tools
‧ Fully enclosed splash guard
‧ Fanuc / Mitsubishi control system
‧ Spindle oil cooler is standard equipment
Specification
FEATURES
Belt Drive Spindle
The belt drive spindle: 8,000 rpm
SPECIFICATIONS
Model | MCV-L1100 |
---|---|
Table | |
Working surface | 600 x 1200 mm |
T-slots (number x size x pitch) | 5 x 18 x 100 mm |
Max. table load | 1000 Kg |
Travel | |
Longitudinal travel (X) | 1100 mm |
Cross travel (Y) | 520 mm |
Headstock travel (Z) | 560 mm |
Distance between spindle end and table top | 150~ 710 mm |
Spindle | |
Type of tool shank | BT40 |
Spindle speeds | Belt 8000 RPM (std.) DDS 10000, 12000, 15000 RPM (opt.) |
Spindle speed range | 1 |
Spindle cooling / lubrication method | Oil / Grease lubrication |
Feed | |
Cutting feed | 1~10000 mm/min |
Rapid traverse (X / Y / Z) | 48 / 48 / 36 m/min |
Minimum input increment | 0.001 mm |
ATC | |
Type | Arm |
Tool holder | BT40 |
Tool storage capacity | 20 /24 tools |
Max. tool weight | 8 Kg |
Max. tool dia. of adjacent pots are empty | 150 mm |
Tool selection | Random |
Tool change time | 3 sec |
Motors | |
Spindle motor | 7.5 / 11 kW |
X axis | 3 kW |
Y axis | 3 kW |
Z axis | 4 kW |
Installation Requirements | |
Power | 25 KVA |
Voltage | 220 V / 50 Hz |
Pneumatlc pressure | 6-8 kg/cm² |
Pneumatlc flowrate | 100 L/min |
Floor space | 3250 x 3000 x 3000 mm |
Net weight | 6700 Kg |
*Note: Due to continuous research and development, the machine design and specifications are subject to change without prior notice.
STANDARD ACCESSORIES
- Fanuc / Mitsubishi control system
- Fully enclosed splash guard
- Rigid tapping
- Automatic lubrication system
- RS-232 interface
- Work lamp
- Automatic power off
- Spindle air blast
- Leveling bolts & pads
- Electrical handwheel
- Tool box with tools & operation manual
- Call light
- Table guard
- Oil circulating cooling system for spindle
- Transformer
- Heat exchanger for electrical cabinet
- Oil pressure box (for gear head)
OPTIONAL ACCESSORIES
- Arm ATC (16 / 20 / 24 Tools)
- Rotary table (4th axis)
- Chip conveyor
- Export packing
- Oil water separating tank