Products
Feature
Experience the Machining Stability
With extra rigid double column construction, high speed spindle as well as high cutting feedrates, the GT-HRS1000 has been fully recognized by the mold making industry.
Its outstanding features make the machine unique on the market.
Four Linear Guide Ways on Base (X-axis)
X-axis is mounted with four heavy duty linear guide ways in combination with great span between linear ways for increasing loading capacity. In addition, no table deformation will occur even under a heavy load condition.
Optimal Structural Design
Double column structure features ultra-high stability in high speed machining.
The table is independently installed on the base and fully supported by 3 roller-type linear guide ways through the entire stroke, assuring mazimum accuracy and dependability.
One-piece Constructed Columns
The specially designed double-column, high speed machine structure combined with one-piece constructed column fully exhibit structural rigidity and stability during heavy cutting.
Three Axes Linear Guide Ways
Roller type linear guide ways on three axes feature higher feed rate, resist heavier loads and ensure superior dynamic accuracy and long service life.
X axis is mounted with four linear guide ways for superior rigidity.
Servo Motor Drives on 3 Axes
Three axes are driven by powerful servo motors. Their power can reduce machining time for large molds and increase profitability.
Deformation Free
All casting parts are stress relieved and treated for lifetime accuracy without any deformation.
High Accuracy
Positioning accuracy : 0.005 mm / Full Stroke. (ISO-230-2)
Repeatability : < 0.004 mm / Full Stroke. (ISO-230-2)
Three axes are equipped with Heidenhain optical scales.
Three Axes Feed Rate
Rapid feed rate : 20 / 18 / 20 m/min.
Cutting feed rate : 20 / 18 / 20 m/min.
Specification
MODEL | T18 |
Travel (X / Y / Z) | 1400 x 1600 x 700 mm |
Table area | 1500 x 1450 mm |
Max. Spindle Speed | 18000 rpm |
Type of spindle speed | Built-in |
Spindle Taper | HSK-A63 |
ATC capacity | 20 / 40 (Opt.) |
*Above specifications are subject to change without prior notice.
B axis | Brand A: Tilting axis | Brand B: Tilting axis |
Total Speed Reduction Ratio | 1:1 | |
Max. Speed | 30~40 rpm | |
Indexing Accuracy | ±5 sec | |
Clamping Torque | 1,250 Nm | 650 Nm |
Tolerant Cutting Force | 800 Nm | 280 Nm |
Rotary Angle | ±115° | ±95° |
C axis Table | Rotary Axis |
Worktable Area | Ø1000 mm |
Center Bore Diameter | Ø60H7 mm |
Load Capacity | 2,500 kg |
Total Speed Reduction Ratio | 1/1 |
Max. Table Rotation Speed | 90 rpm |
Indexing Accuracy | ±5 sec |
Clamping Torque | 4,000 Nm |
Tolerant Cutting Force | 2,310 Nm |
STANDARD ACCESSORIES
- Coolant tank
- Work lamp
- Tool box
- Coolant pump
- Coolant system
- Spindle cone air blast
- Air conditioner for electrical cabinet
- M.P.G
- Work end indication light
- Spindle thermo compensation function
- Caterpillar type chip conveyor and chip cart
- Central lubrication system
- Operation and maintenance manuals
- Leveling bolts and blocks
- Two chip augers beside work table
- Ethernet socket
- X / Y / Z axes optical scale
- B / C axes angle encoders
- Automatic tool length measurement (Laser Type)
- Automatic parts measurement device (Center Calibration)
OPTIONAL ACCESSORIES
- CTS Coolant through spindle
- Oil skimmer
- 40T Arm type magazine