Products
The best features for model SDG includes drawing, forming, blanking, punching and cutting of automotive parts, which comply and satisfy the trend and application of steel parts with light weight but high tensile strength in modern automotive industry. In addition, by combining progressive die with pendulum curve, the productivity can possibly be doubled, which saves more than 50% of energy.
- Powerful direct drive transmission with flexible and easy-to-use operating system.
- Suitable for high tensile strength steel product.
- Tie-rod structure for minimal deflection, accurate parts and machine durability.
- Design makes it easy to integrate automation.
- Saving energy and environmental friendly.
- Crank type design. Up to 2 times of productivity for progressive tooling with swinging (pendulum) motion.
Model |
SDG2-400 |
SDG2-600 |
SDG2-800 |
SDG2-1000 |
SDG2-1200 |
|||
Tonnage Capacity |
kN |
4000 |
6000 |
8000 |
10000 |
12000 |
||
Stroke Length |
mm |
350 |
350 |
350 |
400 |
400 |
||
Stroke per Minute |
spm |
~50 |
~50 |
~50 |
~50 |
~50 |
||
Pendulum Motion Stroke Length |
mm |
100 |
100 |
100 |
140 |
140 |
||
Pendulum Motion Stroke per Minute |
spm |
~ 80 |
~ 80 |
~ 80 |
~ 80 |
~ 80 |
||
Tonnage Rating Point |
mm |
6.5 |
6.5 |
6.5 |
6.5 |
6.5 |
||
Die Height |
mm |
700 |
700 |
800 |
800 |
800 |
||
Slide Adjustment |
mm |
250 |
250 |
300 |
300 |
300 |
||
Slide Area |
1 |
mm |
2500×1400 |
2500×1550 |
2800×1550 |
3100×1550 |
3400×1550 |
|
2 |
2800×1400 |
2800×1550 |
3100×1550 |
3400×1550 |
3700×1550 |
|||
3 |
3100×1400 |
3100×1550 |
3400×1550 |
3700×1550 |
4000×1550 |
|||
4 |
3400×1400 |
3400×1550 |
3700×1550 |
4000×1550 |
4300×1550 |
|||
Bolster Area |
1 |
mm |
2500×1400 |
2500×1550 |
2800×1550 |
3100×1550 |
3400×1550 |
|
2 |
2800×1400 |
2800×1550 |
3100×1550 |
3400×1550 |
3700×1550 |
|||
3 |
3100×1400 |
3100×1550 |
3400×1550 |
3700×1550 |
4000×1550 |
|||
4 |
3400×1400 |
3400×1550 |
3700×1550 |
4000×1550 |
4300×1550 |
|||
Bolster Thickness |
mm |
180 |
250 |
250 |
250 |
300 |
||
Window Opening |
Bolster Only |
FB × UD |
mm |
1100×600 |
1300×600 |
1500×700 |
1500×700 |
1500×700 |
Upper Die Weight |
Ton |
4 |
5 |
5.5 |
6 |
7 |
||
Required Air Pressure |
MPa |
0.55 |
0.55 |
0.55 |
0.55 |
0.55 |
||
Bolster Height |
Fixed Bolster |
mm |
850 |
850 |
850 |
850 |
850 |
|
Rolling Bolster |
660 |
660 |
660 |
740 |
740 |
|||
Die Cushion |
Type |
cylinder |
cylinder |
cylinder* |
cylinder* |
cylinder* |
||
Capacity |
kN |
600 |
1000 |
1200** |
1500 |
1500 |
||
Stroke Length |
mm |
200 |
200 |
220 |
220 |
220 |
||
Adjustment |
mm |
200 |
200 |
220 |
220 |
220 |
||
Die Cushion Area |
1 |
mm |
2000×900 |
2000×950 |
2300×1300 |
2600×1300 |
2900×1300 |
|
2 |
2300×900 |
2300×950 |
2600×1300 |
2900×1300 |
3200×1300 |
|||
3 |
2600×900 |
2600×950 |
2900×1300 |
3200×1300 |
3500×1300 |
|||
4 |
2900×900 |
2900×950 |
3200×1300 |
3500×1300 |
3800×1300 |
|||
* For selecting 1200kN, 1500kN and2000kN air cylinder die cushions, bolster area in FB should be at least 1700mm, cushion area in FB should be 1300mm.
** For SDG2-800-1, only 1000kN die cushion is available.
※ This specification is subject to change without notice.