Products
●Unique single-piece casting made from the finest high grade FC-300 gray cast iron material, coupled with double-wall box-design, forms a rigid machine structure to avoid deformation and resonance during machine. ●By fix-table design, load on 3 moving axes will be nearly constant, without the influence from difference from different workpiece weights. ●Cross rail (Y-axis) is guided by 4 linear guideways to eliminate the yawing effect, normally happened on the wide span of linear guideways support. ●Compacted structure design minimizes the floor space occupied. ●A safety torque coupling on each axis protects the ballscrews ,servo motor and the mechanical components. ●High tech built-in motor spindle-FISCHER that offer a complete speed range from 200 to 24,000 rpm .. Not only powerful torque for rough cutting with low speed but high accuracy for finish cutting with high speed .
TRAVEL | |
X axis (spindle left/right) | 900mm |
Y axis (table in/out) | 600mm |
Z axis (spindle vertical) | 500mm |
Spindle nose to table nose | 150-650 mm |
XYZ drive protection | Torque Limit Coupler Direct |
TABLE | |
Size | 1100 x 600 mm |
T-slot (W x No. x P) |
X:18 x 3 x 200 mm |
Table type | Fixed |
SPINDLE (BUILD-IN) | |
Speed | HSK-A63 24,000 r.p.m. |
Motor | HSK-A63 , 29 Kw |
Taper | HSK-A63 |
Oil chiller | ±1°C of ambient shop temperature |
FEED RATE | |
Cutting feed | 1-20,000 mm/min |
X.Y.Z rapid traverse |
20,000 mm/min (0%, 30%, 50%, 100%) |
PRECISION | |
Position accuracy (X/Y/Z) | 0.004 mm |
Repeatability (X/Y/Z) | 0.002 mm |
AUTOMATIC TOOL CHANGER (Disk magazine) | |
Max. tool dia. | Ø35 |
Max. tool length | 220 mm |
Max. tool weight | 7 kg |
Tool storage capacity | 20 tools |
AIR SUPPLY |
|
Pressure / Consumption | 6 kg/c㎡ / 500l/min |
POWER SUPPLY | |
Capacity | 47 KVA |
COOLANT | |
Coolant pump | 0.58 Kw x 1 , 0.2 Kw x 1 |
Coolant tank capacity | 180 L |
MACHINE SIZE | |
Machine (L x W x H) | 3,010 x 3,716 x 3,100 mm |
Machine weight | 11,000 kg |