886-4-8381860
886-4-8381915
No.361-1, Sec. 1, Shanjiao Rd., Yuanlin Township, Changhua County 51062, Taiwan
www.g-apex.com.twProducts
Applications:
G5 is a polyolefin material heat shrinkable tubing that complies with current environmental regulations. It is widely used in industrial and commercial fields, such as outer insulation protection of wire splices, metal pipes, electronic components, and so on.
Operating temperature range
Continuous operating temperature: -55℃ ~ 125℃
Minimum shrink temperature : 70℃
Full recovery temperature : Above 110˚C
Standard color ：black、white、red、blue、yellow、green, (Other colors ,special size, cut pieces are available on request.) Size 35mm ~ 180mm (35mm included) is without printing on the tubing (blank tube)
Characteristics
- Shrink ratio: 2:1
- Very flexible, high flame retardant
- Resistant to common solvent liquid
- Excellent physical, chemical and electrical performance
- Compliance with RoH
Specification
| Part Number | Nominal Size(mm) | As supplied (mm) | After recovered (mm) | Standard Length (Meter) | |||
|---|---|---|---|---|---|---|---|
| I.D(D) | W.T.(W) | I.D.(max) (d) |
W.T. (min) (w) |
||||
| G5-0008 | 0.8 | 1.0±0.2 | 0.15±0.05 | 0.6 | 0.25 | 200 | |
| G5-0010 | 1.0 | 1.5±0.3 | 0.20±0.05 | 0.7 | 0.33 | 200 | |
| G5-0015 | 1.5 | 2.0±0.3 | 0.20±0.05 | 0.8 | 0.34 | 200 | |
| G5-0020 | 2.0 | 2.5±0.3 | 0.20±0.05 | 1.1 | 0.34 | 200 | |
| G5-0025 | 2.5 | 3.0±0.3 | 0.25±0.05 | 1.25 | 0.42 | 200 | |
| G5-0030 | 3.0 | 3.5±0.3 | 0.25±0.05 | 1.5 | 0.42 | 200 | |
| G5-0035 | 3.5 | 4.0±0.3 | 0.25±0.05 | 1.75 | 0.42 | 200 | |
| G5-0040 | 4.0 | 4.5±0.3 | 0.25±0.05 | 2.0 | 0.42 | 200 | |
| G5-0045 | 4.5 | 5.0±0.3 | 0.25±0.05 | 2.25 | 0.42 | 100 | |
| G5-0050 | 5.0 | 5.5±0.3 | 0.28±0.05 | 2.5 | 0.52 | 100 | |
| G5-0060 | 6.0 | 6.5±0.3 | 0.28±0.05 | 3.0 | 0.52 | 100 | |
| G5-0070 | 7.0 | 7.6±0.3 | 0.30±0.07 | 3.5 | 0.56 | 100 | |
| G5-0080 | 8.0 | 8.6±0.3 | 0.30±0.07 | 4.0 | 0.56 | 100 | |
| G5-0090 | 9.0 | 9.6±0.3 | 0.30±0.07 | 4.5 | 0.56 | 100 | |
| G5-0100 | 10.0 | 10.7±0.4 | 0.30±0.07 | 5.0 | 0.56 | 100 | |
| G5-0110 | 11.0 | 11.7±0.4 | 0.30±0.07 | 5.5 | 0.56 | 100 | |
| G5-0120 | 12.0 | 12.7±0.4 | 0.30±0.07 | 6.0 | 0.56 | 100 | |
| G5-0130 | 13.0 | 13.7±0.4 | 0.35±0.08 | 6.5 | 0.69 | 100 | |
| G5-0140 | 14.0 | 14.7±0.4 | 0.35±0.08 | 7.0 | 0.69 | 100 | |
| G5-0150 | 15.0 | 15.7±0.5 | 0.35±0.08 | 7.5 | 0.69 | 100 | |
| G5-0160 | 16.0 | 16.7±0.5 | 0.35±0.08 | 8.0 | 0.69 | 100 | |
| G5-0170 | 17.0 | 17.7±0.5 | 0.35±0.08 | 8.5 | 0.69 | 100 | |
| G5-0180 | 18.0 | 19.0±0.5 | 0.40±0.10 | 9.0 | 0.77 | 100 | |
| G5-0200 | 20.0 | 21.0±0.5 | 0.40±0.10 | 10.0 | 0.77 | 100 | |
| G5-0220 | 22.0 | 23.0±0.5 | 0.40±0.10 | 11.0 | 0.77 | 100 | |
| G5-0250 | 25.0 | 26.0±1.0 | 0.45±0.10 | 12.5 | 0.87 | 50 | |
| G5-0280 | 28.0 | 29.0±1.0 | 0.45±0.10 | 14.0 | 0.87 | 50 | |
| G5-0300 | 30.0 | 31.5±1.0 | 0.45±0.10 | 15.0 | 0.87 | 50 | |
| G5-0350 | 35.0 | 36.5±1.0 | 0.50±0.10 | 17.5 | 0.97 | 50 | |
| G5-0400 | 40.0 | 42.0±1.5 | 0.50±0.10 | 20.0 | 0.97 | 50 | |
| G5-0450 | 45.0 | 47.0±1.5 | 0.50±0.10 | 22.5 | 0.97 | 25 | |
| G5-0500 | 50.0 | 53.0±2.0 | 0.55±0.10 | 25.0 | 0.97 | 25 | |
| G5-0600 | 60.0 | 63.0±3.0 | 0.60±0.15 | 30.0 | 1.17 | 25 | |
| G5-0700 | 70.0 | 71.0±3.0 | 0.60±0.15 | 35.0 | 1.17 | 25 | |
| G5-0800 | 80.0 | 81.0±3.0 | 0.65±0.15 | 40.0 | 1.20 | 25 | |
| G5-0900 | 90.0 | 91.0±3.0 | 0.75±0.15 | 45.0 | 1.30 | 25 | |
| G5-1000 | 100 | 101.0±3.0 | 0.75±0.15 | 50.0 | 1.30 | 25 | |
| G5-1200 | 120 | 121.0±4.0 | 0.80±0.20 | 60.0 | 1.40 | 15 | |
| G5-1500 | 150 | 151.0±4.0 | 0.80±0.20 | 75.0 | 1.50 | 15 | |
| G5-1800 | 180 | 181.0±4.0 | 0.80±0.20 | 90.0 | 1.60 | 15 | |
Technical Data
| Property | Specification Requirement | Test Method | Typical Value |
|---|---|---|---|
|
Longitudinal change |
-10%～10% |
ASTM D2671 |
Pass |
|
Tensile strength |
≥10.3MPa |
ASTM D2671 |
≥11.3MPa |
|
Elongation at break |
≥200% |
ASTM D2671 |
≥400% |
|
Tensile strength after aging |
70% of initial value |
ASTM D2671 (158˚C/168小時) |
≥80% |
|
Elongation at break after aging |
≥100% |
ASTM D2671 (158˚C/168小時) |
≥200% |
| Heat shock |
No cracking |
ASTM D2671 (200˚C/4小時) |
No cracking |
| Low temperature flexibility |
No cracking |
ASTM D2671 (-30˚C/1小時) |
No cracking |
| Dielectric voltage withstand |
AC2500V/60S |
ASTM D2671 |
No breakdown |
| Volume resistivity |
≥1014Ω‧cm |
ASTM D2671 |
≥1014Ω‧cm |
| Dielectric strength |
≥19.7kV/mm |
ASTM D2671 |
22 kV/mm |
| Flammability |
VW-1 |
UL224 |
Pass |
