Products
Applications:
AIS-ES is a waterproof heat shrinkable tubing for automotive wire harnesses. It is specially designed for wire harness insulation and waterproofing in the automotive industry. The higher 4:1 shrink ratio and high temperature resistance polyamide hot melt adhesive can fully resist water and protect the wire harness from corrosion and moisture. The outer layer is made of semi-rigid and abrasion resistant polyolefin, providing full protection for harsh environments in automotive.
Operating Temperature Range:
Continuous operating temperature: -55˚C~130˚C
Minimum shrink temperature: 135˚C
Full recovery temperature: Above 135˚C
Color:
black
Standard color: black (Other colors, special sizes, and cut pieces are available on request.)
Characteristics
- 4:1 high shrink ratio
- Excellent watertight seal
- Semi-rigid, abrasion resistant and flame retardant material
- Resistant to common solvent
- Compliance with RoHS and REACH environmental regulations
Specification
- Characteristics
- Specification
- Technical Data
Part Number | As supplied (mm) | After recovered (mm) | Standard Length(Meter) | |
---|---|---|---|---|
I.D.(min) | I.D.(max) | W.T(min) | ||
AIS-ES1 | 5.72 | 1.27 | 1.20 | 1.22 |
AIS-ES2 | 7.44 | 1.65 | 1.52 | 1.22 |
AIS-ES3 | 10.85 | 2.41 | 1.91 | 1.22 |
AIS-ES4 | 17.78 | 4.45 | 2.41 | 1.22 |
Technical Data
Property | Specification Requirement | Test Method | Typical Value |
---|---|---|---|
Longitudinal change | 0%~10% | ASTM D2671 | Pass |
Tensile strength | ≥10.3MPa | ASTM D2671 | ≥14MPa |
Elongation at break | ≥200% | ASTM D2671 | ≥200% |
Tensile strength after aging | 70% of initial value | ASTM D2671 (158˚C/168 hrs) |
≥70% |
Elongation at break after aging | ≥100% | ASTM D2671 (158˚C/168 hrs) |
≥100% |
Heat shock | No cracking | ASTM D2671 (250˚C/4 hrs) |
No cracking |
Low temperature flexibility | No cracking | ASTM D2671 (-40˚C/4 hrs) |
No cracking |
Dielectric voltage withstand | AC2500V/60S No breakdown |
ASTM D2671 | No breakdown |
Volume resistivity | ≥1014Ω‧cm | ASTM D2671 | ≥1014Ω‧cm |
Copper corrosion | No corrosion | ASTM D2671 (158˚C/168 hrs) |
No corrosion |
Flammability | Self extinguishing within 30S after fire source removed. | UL224 | Pass |